Sony PFV-SP3300 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System stereo Sony PFV-SP3300. Sony PFV-SP3300 16 stron. Signal processing unit, backup power supply unit
Również dla Sony PFV-SP3300: Instrukcja obsługi (18 strony), Instrukcja obsługi (18 strony), Podręcznik konserwacji (40 strony)

Drukuj stronę

1-1. Operating Environment

Operating temperature

Performance temperature

Humidity

Mass: PFV-SP3300

HK-PSU03

. To prevent overheating of PFV-SP3300, ensure that

there is good air circulation around the unit.

. Do not put the unit in a place subject to excessive lamp

smoke, vapor, moisture, or dust.

Install in a stable location.

Installation on unstable or tilting surface may cause the

unit fall off, resulting in injury.

PFV-SP3300

Section 1

Installation

+5 dC to +40 dC

+10 dC to +35 dC

10 to 90 % (No condensation)

Approx. 10 kg

(Without the optional unit and

board)

Approx. 2 kg

1-2. Power Supply

1-2-1. Power Supply Specifications

Power voltage

AC 100 V to 240 V

Power frequency

50 Hz or 60 Hz

Current consumption

3.5 to 1.5 A

Rush current

AC 100 V IN : 15 A

AC 240 V IN : 55 A

AC power supply is required a capacity which is commen-

surate with rush current.

If the capacity of the AC power supply is not enough, the

breaker of AC power on the supply side may operate or

this unit may not operate normally.

1-2-2. Recommended Power Cord

For customers in the U.S.A. and Canada

Required Part

1 Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11

For customers in the United Kingdom

Required Part

2 Power cord, 250 V 10 A (2.5 m) : ! 1-782-929-11

For the customers outside of the area as shown above,

please contact your local Sony Sales Office/Service Center.

. Use a specified power cord only.

Be sure to use a recommended power cord to avoid fire

and/or an electric shock.

. Ground the unit for your safety.

Be sure to attach a ground wire to avoid an electric shock.

AC inlet

1-1 (E)