Sony PS-HX500 Instrukcja obsługi - Strona 23
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony PS-HX500. Sony PS-HX500 28 stron. Stereo turntable system
Również dla Sony PS-HX500: Instrukcja serwisowa (26 strony)
You hear rumbling or low-frequency
howling noises*.
C Your turntable is placed too close to speakers.
Move the turntable away from the speakers.
* This phenomenon, called "acoustic feedback,"
occurs when vibrations that travel through the air
or solid objects (such as shelves, a cabinet, or the
floor) from speakers are picked up by the stylus,
amplified and reproduced through the speakers.
You hear noises.
C Make sure that the PHONO/LINE switch on
the rear of your turntable is set to LINE. If the
PHONO/LINE switch is set to PHONO when
the turntable is connected to any other input
jacks than the PHONO input jacks on the
audio device, you may hear playback noises.
When the PHONO/LINE switch is set to LINE,
do not connect the turntable to the PHONO
input jacks on the audio device.
C Make sure that a computer is NOT connected
to your turntable with a USB cable. With a
computer connected to the turntable via the
USB port, playback with the connected audio
device may cause noises.
The sound pitch is too high or low.
C A wrong rotation speed is selected. Check the
center label of the vinyl record or the record
jacket for the rotation speed and select the
appropriate one. Rotate the SPEED/POWER
rotary switch knob to select "33" for 33 1/3
rpm records or "45" for 45 rpm records.
C The drive belt may be twisted or worn out.
Untwist the drive belt. (See page 21.)
The sound pitch fluctuates.
C Make sure that the stylus pressure and the
anti-skating force are properly set. (See page
12.)
C The stylus is worn out. Replace it with a new
one. (See page 20.)
The drive belt is worn out or broken.
C Replace the drive belt. (See page 21.)
To obtain a spare drive belt, contact your
dealer or the customer support website. (See
page 26.)
The platter does not turn.
C Make sure that the AC adaptor is firmly
connected to a power outlet and the DC IN on
your turntable.
C Make sure that the drive belt is completely
hooked around the motor pulley. (See page
10.)
Playback sound is too low in volume or
distorted.
C Make sure that the PHONO/LINE switch
selection on your turntable matches the type
of the input jacks on the audio device used
for connection with the turntable. (See page
14.)
Software installation
You cannot install the Hi-Res Audio
Recorder application onto a computer.
C Visit our support website for detailed
instructions on downloading and installing
the application.
For customers in Europe:
Access http://www.sony.eu/support, switch
to the website for your country, and then
search for "Hi-Res Audio Recorder."
For customers in the U.S.A.:
Access http://esupport.sony.com/ and
search for "Hi-Res Audio Recorder."
For customers in Canada:
Access http://esupport.sony.com/CA/ and
search for "Hi-Res Audio Recorder."
C Make sure that the computer has Internet
connection.
23