Sony PS-HX500 Instrukcja serwisowa - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla System stereo Sony PS-HX500. Sony PS-HX500 26 stron. Stereo turntable system
Również dla Sony PS-HX500: Instrukcja obsługi (28 strony)
PS-HX500
2-9.
MOTOR ASSY (M1)
Note 1: When turning the main unit over, refer to "NOTE IN THE
Note 2: When replacing the motor assy, refer to "DC MOTOR SPEED
CASE OF THE REVERSING THE MAIN UNIT" on page 3.
ADJUSTMENT" on page 15.
1 Remove the
[red]
[yellow: 5 pin]
four solders.
motor assy (M1)
[black]
[yellow: 6 pin]
SW board
bottom side
front side
6 pin
5 pin
2 three screws
(STEP M2.5
1.5)
Note 3: Removing the two screws
is not necessary.
top side
Note 3: Removing the screw
is not necessary.
front side
3 motor assy
(M1)
Note 4: If you remove the three screws (step 2), the motor assy
will fall. When removing the screws, make sure that
you hold the motor assy.
13