Sony RCD-W222ES - Cd/cdr Recorder Instrukcja obsługi - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony RCD-W222ES - Cd/cdr Recorder. Sony RCD-W222ES - Cd/cdr Recorder 32 stron. Limited warranty (es products)
Również dla Sony RCD-W222ES - Cd/cdr Recorder: Specyfikacje (2 strony), Ograniczona gwarancja (1 strony), Instrukcja obsługi (34 strony)
Drukuj stronę
Finalizing a CD-R or CD-
RW
Finalizing completes the recording of a disc. It
enables you to play the disc on other players.
(The player must be CD-RW compatible. )
When a recording is finished, a CD-R or CD-
RW must be finalized. Once that is done, a CD-
R may not be added or erased to. CD-RWs are
locked once they are finalized, and must be
unfinalized to permit additional recording or
erasure.
When using the remote, set SELECT to CDR.
SELECT
FINALIZE
1
Place a CD-R or CD-RW that has not
been finalized in DECK B.
Make sure that "TOC" appears in the
display. If a finalized CD is loaded, "TOC"
does not appear.
2
Press FINALIZE while the unit is
stopped.
Finalizing enters standby mode.
3
Press N (or
YES).
Finalizing starts. During finalizing,
"Finalize" appears in the display and the
remaining time for finalizing (may not be
accurate) appears. When the finalizing
process is finished, the total track number
and total playing time appears in the display
and the TOC (red) indicator goes off.
24
FINALIZE
N
H
on the remote) (or
H
Notes
• Once the finalizing process starts, you cannot stop
in the middle of the process.
• Do not turn off the unit or disconnect the unit from
the power source in the middle of the finalizing
process. Recording will not been complete
successfully, and you will not be able to play back
the recorded tracks.
• An unfinalized disc can be played back only in
DECK B.