Sony RDH-GTK1i Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony RDH-GTK1i. Sony RDH-GTK1i 28 stron. General stereo/hi fi components/tape decks/cd players/mini disc players/audio systems
Również dla Sony RDH-GTK1i: Specyfikacje (2 strony), Ograniczona gwarancja (1 strony)

Drukuj stronę

Changing the display

Changing the display mode

(Except North American model)

Press DEMO/SPEAKER LIGHT on

the unit repeatedly while the unit is

in standby mode.

Demonstration

The demo display appears and the speaker

light flashes even when the unit is set to

standby mode.

No display

The demo display and speaker light are

turned off.

Viewing the display

information

Press DISPLAY repeatedly while

the unit is turned on.

You can view the USB device

information as follows:

• track or file number

• track name ("

• file name ("

• artist name ("

• album name ("

• folder name ("

Notes on the display information

• Characters that cannot be displayed appear as

"_".

• The following are not displayed correctly:

– elapsed playing time of a file encoded using

a VBR (variable bit rate).

– folder and file names that do not follow

either the ISO9660 Level 1, Level 2 or Joliet

in the expansion format.

Additional Information

Troubleshooting

Should you encounter a problem with

your system, do the following:

Make sure the power cord and

subwoofer cable (FST-GTK2i only)

are connected correctly and firmly.

Find your problem in the

troubleshooting checklist below and

take the indicated corrective action.

If the problem persists after doing all of

the above, consult your nearest Sony

dealer.

Note that if service personnel changes

some parts during repair, these parts may

be retained.

If "PROTECT" appears on the

display

Immediately press POWER on the

back panel to turn off the unit and

unplug the power cord. Then perform

the following items.

• Remove anything that is blocking

the ventilation hole.

• If your unit has a voltage selector,

set the voltage selector to the correct

voltage.

• Disconnect the USB device and

iPod.

• Disconnect audio cord from the

AUDIO IN L/R jacks.

After checking the above items and

fixing any problems, plug in the power

cord again and turn on the unit. If the

"PROTECT" still appears, or if the

cause of the problem cannot be found

even after checking all the above

items, consult your nearest Sony

dealer.