Sony SA-NS500 Szybka konfiguracja
Przeglądaj online lub pobierz pdf Szybka konfiguracja dla System stereo Sony SA-NS500. Sony SA-NS500 2 stron. Wireless network speakers
Również dla Sony SA-NS500: Podręcznik szybkiej konfiguracji (2 strony), Specyfikacje (4 strony), Ograniczona gwarancja (1 strony), Instrukcja podłączania (2 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Sony
Wireless Network Speakers
®
Easy to set up. Easy to use.
PC or Mac, play music anywhere
your Wi-Fi
goes —even outside.
®
STEP 1: Introduce your speaker to your router.
Before you begin, make sure your
OPTION 1: Automatic Wired Set-up
1. Turn speaker on:
SA-NS300, SA-NS400
On back near base.
SA-NS500 ( 2 buttons )
On bottom.
Both buttons need to
be in the up position
for sync only.
OPTION 2: "WPS" Push-button Set-up
1. Turn speaker on:
SA-NS300, SA-NS400
On back near base.
SA-NS500 ( 2 buttons )
On bottom.
Both buttons need to
be in the up position
for sync only.
IMPORTANT NS500 ONLY: After connection is made, switch bottom button
Additional set-up methods for any router, computer and most operating systems are detailed in the
operating instructions manual in the box. Also enclosed is a Quick-Start Guide for PC and Mac.
router and computer are on
( easy 2-step method )
2. Connect speaker and computer to router.
When "LINK" light on speaker turns orange, unplug the
cable. System will reboot/sync to Wi-Fi
( Wi-Fi
2. Press "WPS" button
on router:
Router/Access Point
The WPS button may vary.
Check your router manual.
When "LINK" light on speaker turns orange,
system will reboot/sync to Wi-Fi
down to NETWORK STANDBY MODE to play.
SA-NS300
and connected.
Ethernet
Router/
Cable
Access Point
( included )
Protected 3-step method )
®
3. Press/hold "WPS"
SA-NS400
SA-NS500
To
Computer
( green light ) .
®
button ( for 3 sec. )
on back of speaker
( green light ) .
®