Sony SEN-280 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony SEN-280. Sony SEN-280 16 stron. Cassette decks: stereo cassette deck
Również dla Sony SEN-280: Podręcznik użytkownika (17 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

Precautions

On safety

• Operate the stereo system only on 120 V AC, 60 Hz.

• Unplug the stereo system from the wall outlet if it is not to

be used for an extended period of time. To disconnect the

cord, pull it out by grasping the plug. Never pull the plug out

by the cord.

• Do not place anything on top of the amplifier. The

ventilation holes must be unobstructed for the proper

operation of the unit and to prolong the life of its

components.

• Should any liquid or solid object fall into the unit, unplug

the stereo system, and have the unit checked by qualified

personnel before operating it any further. For repairs, take

in all the components together, even if only one needs

repairing.

On installation

• Avoid installing or leaving the stereo system in a location:

— near heat sources such as radiators, airducts or heaters

subject to direct sunlight

— exposed to rain or moisture

— where it is liable to come into contact with dust or dirt

— that is unventilated, such as a bookcase

If you have any question or problem concerning your stereo

system that is not covered in this manual, please consult

your nearest Sony dealer.

For the customers in the U.S.A.

For detailed precautions, see the leaflet "IMPORTANT

SAFEGUARDS".

For the customers in Canada

(—CAUTION; ---

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

POLARIZED AC PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE.

To change the AM tuning interval

The AM tuning interval is preset at the factory to 10 kHz to

match the frequency allocation system of your country.

To change the interval to 9 kHz, proceed as follows.

Depress the POWER switch to turn on the system.

2 Press the TUNER button.

3 Press the BAND FM/AM selector to select AM.

Press the POWER switch to turn off the system.

5 While pressing the "+" TUNING button, press the

POWER switch to turn it on.

To reset the interval to 10 kHz, follow the same procedure.

Note

When the interval is changed, all stations memorized to

the 10-key station preset selector will be erased.

After changing the interval, be sure to memorize the

stations again.

TurntabiG AsSGmbly

(Canadian model only)