Sony SHAKE-7 Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony SHAKE-7. Sony SHAKE-7 44 stron. Mini hifi component system

Drukuj stronę

Speakers

Sound comes from one channel or

unbalanced left and right volume.

• Place the speakers as symmetrically as

possible.

• Check that the speakers are connected

securely and correctly.

• The source being played back is

monaural.

There is no sound from a specific

speaker.

• Check that the speaker is connected

securely and correctly.

• (LBT-GPX55/MHC-GPX88/GPX55

only)

Set the subwoofer level to the

appropriate level (page 27).

Disc player

The disc tray does not open and

"LOCKED" appears in the display

panel.

• Consult your nearest Sony dealer or

local authorized Sony service facility.

The disc tray does not close.

• Load the disc correctly.

The disc does not eject.

• You cannot eject the disc during

CD-USB Synchronized Transfer or

REC1 Transfer. Press x to cancel the

transfer, then press Z OPEN/CLOSE

on the unit to eject the disc.

• Consult your nearest Sony dealer.

Playback does not start.

• Wipe the disc clean (page 38).

• Reload the disc.

• Load the disc that this system can play

back (page 32).

• Remove the disc and wipe away the

moisture on the disc, then leave the

system turned on for a few hours until

the moisture evaporates.

The sound skips.

• Wipe the disc clean (page 38).

• Reload the disc.

• Move the unit to a place with no

vibration (e.g., on top of a stable stand).

• Move the speakers away from the unit,

or place them on separate stands. When

you listen to a track with bass sounds at

high volume, the speaker vibration may

cause the sound to skip.

Playback does not start from the first

track.

• Set the play mode to Normal Play

(page 17).

The folder name, track name, file

name and ID3 tag characters do not

appear properly.

• The ID3 tag is not Version 1(1.0/1.1)

and Version 2(2.2/2.3).

• The character code that can be displayed

by this system are as follows:

– Upper cases (A to Z)

– Numbers (0 to 9)

– Symbols (< > * +, [ ] \ _)

Other characters appear as "_".

USB device

Transferring results in an error.

• You are using an unsupported USB

device. Check the information on the

websites about compatible USB devices

(page 15).

• The USB device is not formatted

correctly. Refer to the operating

instructions of the USB device on how

to format.

• Turn off the system and remove the

USB device. If the USB device has a

power switch, turn the USB device off

and then on again after removing it from

the system. Then perform transferring

again.