Sony SS-EC70 Instrukcja obsługi
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony SS-EC70. Sony SS-EC70 2 stron. Mini hifi component system
Drukuj stronę
Mini HI-FI
Component System
Operating Instructions
Owner's Record
The model and serial numbers are located on the rear of the unit. Record these numbers in the space
provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
Printed on 100% recycled paper
using VOC (Volatile Organic
MHC-EC70
Compound)-free vegetable oil
based ink.
© 2006 Sony Corporation
Printed in China
WARNING
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
To reduce the risk of fire or electric
product's enclosure that may be of
sufficient magnitude to constitute a risk
shock, do not expose this apparatus to
of electric shock to persons.
rain or moisture.
This symbol is intended to alert the
user to the presence of important
CAUTION
operating and maintenance (servicing)
The use of optical instruments with this product will
instructions in the literature
increase eye hazard.
accompanying the appliance.
For customers in the U.S.A.
Hooking up the system securely
Antennas
Keep the antennas away from the speaker cords to avoid
picking up noise.
FM lead antenna
(Extend it horizontally.)
AM loop antenna
Right speaker
(Low freq.)
Right speaker
(High freq.)
Power
Connect the power cord to a wall socket.
Wall socket
WARNING
Music discs encoded with
copyright protection technologies
This equipment has been tested and found to comply
2-670-405-13(1)
with the limits for a Class B digital device, pursuant
This product is designed to playback discs that
to Part 15 of the FCC Rules. These limits are designed
conform to the Compact Disc (CD) standard. Recently,
to provide reasonable protection against harmful
various music discs encoded with copyright protection
interference in a residential installation. This equipment
technologies are marketed by some record companies.
generates, uses, and can radiate radio frequency energy
Please be aware that among those discs, there are some
and, if not installed and used in accordance with the
that do not conform to the CD standard and may not be
instructions, may cause harmful interference to radio
playable by this product.
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
GB
this equipment does cause harmful interference to radio
MPEG Layer-3 audio coding technology and patents
or television reception, which can be determined by
licensed from Fraunhofer IIS and Thomson.
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
U.S.A., Canadian and Australian
models only
ENERGY STAR
®
is a U.S. registered
mark. As an ENERGY STAR
partner,
®
Sony Corporation has determined that
this product meets the ENERGY STAR
®
guidelines for energy efficiency.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
When carrying this system
1
Remove all discs to protect the CD mechanism.
2
Hold down CD (play/pause) on the unit, and press
until "STANDBY" appears.
3
After "LOCK" appears, unplug the power cord.
Insert only the stripped portion of the cord.
Solid (Blue/)
Solid (Gray/)
Solid (Red/)
Solid (Black/)
Speakers
Attach the supplied speaker pads to the bottom of the
speakers to prevent slipping.
Basic Operations
Before using the system
To use the remote
Slide and remove the battery compartment lid
, and
insert the two R6 (size AA) batteries (not supplied),
side first, matching the polarities shown below.
Notes on using the remote
• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix different types of
batteries.
• If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
1
Turn on the system.
Press (power)
.
2
Select the clock set mode.
Press CLOCK/TIMER SET
on the remote. If the
current mode appears on the display, press /
on the remote repeatedly to select "CLOCK," and
then press ENTER
on the remote.
3
Set the time.
Left speaker
Press /
on the remote repeatedly to set
(Low freq.)
the hour, and then press ENTER
on the remote.
Use the same procedure to set the minutes.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
Selecting a music source
Left speaker
Press the following buttons (or press FUNCTION
(High freq.)
repeatedly).
To select
Press
CD
CD
on the remote.
Tuner
TUNER/BAND
.
Tape
TAPE
on the remote.
Component* (connected
FUNCTION
using an audio cord)
repeatedly until "AUDIO
IN" appears.
* If the component has the AVLS (Automatic Volume Limiter System)
or BASS BOOST function, turn off the function to avoid distorted
sound from the speakers.
Notes on playing multisession discs
Adjusting the sound
• If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.
To adjust the volume
• A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Press VOLUME +/– on the remote (or turn the
VOLUME control on the unit)
.
To add a sound effect
Listening to the radio
To
Press
1
Select "FM" or "AM."
Generate a more dynamic
DSGX
on the unit.
sound (Dynamic Sound
Press TUNER/BAND
repeatedly.
Generator X-tra)
2
Select the tuning mode.
Set the sound effect
EQ
.
Press TUNING MODE
repeatedly until "AUTO"
appears.
3
Tune in the desired station.
Playing a CD/MP3 disc
Press +/– on the remote (or TUNING + or – on the
unit)
. Scanning stops automatically when a station
1
is tuned in.
Select the CD function.
Press CD on the remote (or FUNCTION repeatedly)
To stop automatic scanning
.
Press (stop)
.
2
Place a disc.
To tune in a station with a weak signal
Press (eject)
on the unit, and place a disc with
Press TUNING MODE
repeatedly until "MANUAL"
the label side up on the disc tray. To place additional
appears, and then press +/– on the remote repeatedly (or
discs, slide the disc tray with your finger as shown
TUNING + or – on the unit)
to tune in the desired
below.
station.
To close the disc tray, press
on the unit.
To reduce static noise on a weak FM stereo
Do not force the disc tray closed with your finger, as
station
this may damage the unit.
Press FM MODE
on the remote repeatedly until
"MONO" appears to turn off stereo reception.
Playing a tape
Use buttons on the unit for the operation.
1
Select a tape function.
Press FUNCTION repeatedly (or TAPE on the
remote)
.
3
Select a disc.
2
Insert a tape.
If the discs are currently stopped, press DISC SKIP
Press (stop/eject)
on the unit, and insert the
on the remote (or DISC SKIP/EX-CHANGE on the
tape into the cassette holder. Make sure there is no
unit)
. To change discs while in other functions,
slack in the tape to avoid damaging the tape or the
press DISC 1 – 3
on the unit.
tape deck.
4
Start playback.
3
Start playback.
Press (play)
(or CD (play/pause)
on
Press (play)
on the unit.
the unit).
To exchange other discs during playback, press DISC
To
Press
SKIP/EX-CHANGE
on the unit.
Pause playback
(pause)
play, press it again.
To
Press
(stop/eject)
Stop playback
Pause playback
(pause)
on the remote
/
(or CD
Rewind or fast
on the unit). To
forward*
resume play, press it again.
(stop)
* Be sure to press (stop/eject)
on the unit after the tape has
Stop playback
.
been wound or rewound to the end.
Select a folder on an
+/–
.
Note
MP3 disc
Do not turn off the system during playback or recording.
Select a track or file
(go back/go forward)
on the remote ( on the
unit)
.
Changing the display
Hold down / (rewind/fast
Find a point in a
track or file
forward)
during playback, and
To change
Press
release it at the desired point.
Information on
DISPLAY
Select Repeat Play
REPEAT
on the remote
the display
system is on.
1)
repeatedly until "REP" appears.
Display mode
DISPLAY
(Clock)
off
. The clock is displayed for eight
2)
To change the play mode
seconds.
Press PLAY MODE
repeatedly while the player is
stopped. You can select normal play (no display for all
1)
For example, you can view CD/MP3 disc information, such as the
track or file number or folder name during normal play, or the total
discs or "1 DISC" for a disc or "
" for all MP3 files
play time while the player is stopped.
in the folder on the disc), shuffle play ("SHUF" for
2)
The STANDBY indicator
lights up when the system is turned
all discs shuffle, "1 DISC SHUF" for one disc shuffle
off.
or "
SHUF*" for folder shuffle), or program play
Notes on the display information
("PGM").
• The following are not displayed correctly;
* When playing a CD-DA disc,
(SHUF) Play performs the same
– total playing time for a disc with MP3 files.
operation as 1 DISC (SHUF) Play.
– elapsed playing time and remaining time of an MP3 file encoded
Notes on Repeat Play
using a VBR (variable bit rate) when the file is played or is shifted
with fast forward or fast reverse.
• All tracks or files on a disc are played repeatedly up to five times.
– folder and file names that do not follow either the ISO9660 Level
• You cannot select "REP" and "SHUF" (all discs shuffle) at the same
1 or 2 standard.
time.
• The following are displayed;
• "REP1" indicates that a single track or file is repeated until you stop
– ID3 tag information for MP3 files when ID3 version 1 and version
it.
2 tags are used.
Notes on playing MP3 discs
– up to 15 characters of ID3 tag information using uppercase letters
• Do not save other types of tracks or files or unnecessary folders on a
(A to Z), numbers (0 to 9), and symbols ('< > * + , – / @ [ \ ] _).
disc that has MP3 files.
• Folders that have no MP3 files are skipped.
• MP3 files are played back in the order that they are recorded onto
Using optional audio
the disc.
• The system can only play MP3 files that have a file extension of
components
".MP3".
• If there are files on the disc that have the ".MP3" file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
To connect an optional headphones
• The maximum number of:
Connect headphones to the PHONES jack
– folders is 150 (including the root folder).
unit.
– MP3 files is 255.
– MP3 files and folders that can be contained on a single disc is
To connect an optional component
256.
Connect additional audio source components to the
– folder levels (the tree structure of files) is eight.
AUDIO IN jack
on the unit using an audio analog
• Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
cord (not supplied). Turn down the volume on the
MP3 discs may produce noise or interrupted audio or may not play
system, and then select the AUDIO IN function.
at all.
on the unit. To resume
on the unit.
on the unit.
repeatedly when the
when the system is
on the