Sony SS-GSX100 Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony SS-GSX100. Sony SS-GSX100 44 stron. Sony operating instructions mini hi-fi component system mhc-gsx100w, mhc-gsx75
Drukuj stronęOther operations
To
Cancel Program Play
Check the program
Add tracks or discs to the
end of the program
Clear a track or disc from
the end
Erase the entire program Press and hold CLEAR in
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press nN in Program Play mode.
• "– –.– –" appears when the total program time
exceeds 100 minutes, or when you select a disc track
whose number is 21 or over or when you
programmed an MP3 audio track.
• The programmed disc and track numbers remain
until you erase them, so that the system plays only
the existing disc and track numbers if you replace
discs. However, the disc and track numbers that are
not found in the system or on the disc are deleted
from the program, and the rest of the program is
played in the programmed order.
Do this
Press PLAY MODE in stop
mode repeatedly until
"PGM" disappears.
Press . or >
repeatedly during Program
Play.
Perform step 6.
Press CLEAR in stop
mode.
stop mode.
Labeling a disc
— Disc Memo
You can label up to 60 discs with titles of up to
20 characters. Whenever you load a labeled disc,
the title appears in the display.
You can also label discs using an optional
keyboard (see "Labeling titles through the
keyboard" on page 31).
Notes
• You cannot label a CD-TEXT disc.
• To ensure that Disc Memos are not erased from
memory, have the system connected to a wall outlet
at least once a day.
• You can label a disc only during Normal Play (when
"1 DISC", "ALL DISCS" or "ALBM" is displayed)
in stop mode.
1
Press CD to switch the function to CD.
If "SHUF" or "PGM" appears, press PLAY
MODE repeatedly until both disappear.
2
Press DISC + or – (or turn DISC
SELECT on the unit) until the disc
number you want to label appears.
3
Press MENU.
4
Press . or > repeatedly until
"NAME IN" appears.
5
Press ENTER.
The cursor appears.
6
Turn DISC SELECT on the unit until the
character you want appears.
You can input the following characters:
• Upper cases (A - Z)
• Numbers (0 - 9)
• Symbols (' – / , + < > _ = `)
7
Press M.
The character you selected in step 6 stops
flashing and the cursor shifts to the right.
continued
GB
17