Sony SS-RS560 Instrukcja obsługi - Strona 35
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony SS-RS560. Sony SS-RS560 41 stron.
Drukuj stronęAmplifier
section
MHCMGSl
OAV/MGBl
OAV/MGl
10
U.S.A.
models:
AUDIO
POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC
DISTORTION:
with 8 ohm loads both channels liven,
from
120 - 10,000 Hz; rated 75 watts per channel
mmimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
MHC-BAGS1
OAV
Front
speaker:
Contmuous
RMS power
output
75 + 15 watts
(8 ohms at 1 Wz,
10% THD)
Total harmomc
distortion
less than 0.09%
(8 ohms at
40 watts)
Center
speaker:
Continuous
RMS power output
45 watts
(8 ohms at 1
10% THD:
Rear speaker:
Contmuous
RMS power output
kHz,
45 + 45 watts
(8 ohms at 1 kHz,
10% THD)
Sub woofer:
Contmuous
RMS power output
45 watts
(8 ohms at 100 Hz,
10% THD)
MHC.MG31
OAV
Front
speaker:
Contmuous
RMS power output
15 + 15 watts
(8 ohms at 1 kHz,
10% THD)
Total harmomc
distortton
less than 0.09%
(8 ohms at 1 kHz,
40 waus)
Center
speaker:
Continuous
RMS power output
25 watts
(8 ohms at 1 kHz,
10% THD)
Rear speaker:
Contmuous
RMS power output
25 + 25 watts
(8 ohms at I kHz,
10% THD)
MHC.MGl
10
Continuous
RMS power output
15 + 15 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic
distortion
less than 0.09%
(8 ohms at 1 kHz,
40 watts)
Inputs
VIDEO/MD
IN (phone Jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
5.1CH (MHC-MG510AVIMG310AV
only):
FRONT
(phonojacks):
voltage 450 mV,
Impedance 47 kilohms
REAR (phono
JaCkS):
voltage 450 mV,
impedance 47 kilohms
CENTER
(phono Jack):
voltage 450 mV,
Impedance 47 kilohms
SUB WOOFER
(phono Jack):
voltage 450 mV,
impedance
47 kilohms
35