Sony STR-DH130 Instrukcja obsługi - Strona 27

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony STR-DH130. Sony STR-DH130 36 stron. Fm stereo / fm-am receiver
Również dla Sony STR-DH130: Podręcznik szybkiej konfiguracji (2 strony), Specyfikacje (2 strony), Ograniczona gwarancja (1 strony), Instrukcja serwisowa (36 strony), Instrukcja obsługi (35 strony), Instrukcja serwisowa (36 strony)

Drukuj stronę

Overview of the menus

x BALANCE (Speaker balance)

Lets you adjust the balance between left and

right speakers.

You can adjust from BAL. L+10 to

BAL. R+10 in 1dB/step.

The initial setting is BAL. 0.

x NAME IN (Naming)

Lets you set the name of inputs and preset

stations. For details, see "Naming inputs"

(page 20) and "Naming preset stations"

(page 25).

x AUTO.STBY (Auto Standby)

Lets you set the receiver switch to standby

mode automatically when you do not operate

the receiver or when there is no signals input to

the receiver.

• STBY ON

Switches to standby mode after

approximately 30 minutes.

• STBY OFF

Does not switch to standby mode.

Notes

• This function does not work when TUNER input is

selected.

• If you use the Auto standby mode and the Sleep

Timer at the same time, the Sleep Timer has

priority.

Using the Remote Control

Reassigning the input

button

You can change the default settings of the

input buttons to suit the equipment in your

system. For example, if you connect a Blu-ray

Disc player to the SAT jack on the receiver,

you can set the SAT button on this remote

control to control the Blu-ray Disc player.

Note

You cannot reassign the TUNER and PORTABLE

input buttons.

Hold down the input button of

which you want to change the

assignment.

Example: Hold down SAT.

Referring to the table below,

press the corresponding

button for the category you

want.

Example: Press 8.

Now you can use the SAT button to

control the Blu-ray Disc player.

continued