Sony WX-850BT Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony WX-850BT. Sony WX-850BT 35 stron. Bluetooth audio system

Drukuj stronę

AUTO OFF

Shuts off automatically after a desired time

when the unit is turned off: [ON] (30 minutes),

[OFF].

STEERING

Registers/resets the setting of the steering

wheel remote control.

(Available when connected with the connection

cable (not supplied).) (Available only while the

source is off and the clock is displayed.)

STR CONTROL (steering control)

Selects the input mode of the connected remote

control. To prevent a malfunction, be sure to

match the input mode with the connected

remote control before use.

CUSTOM

Input mode for the steering wheel remote

control (automatically selected when [EDIT

CUSTOM] is complete or [RESET CUSTOM] is

performed)

PRESET

Input mode for the wired remote control

excluding the steering wheel remote control

EDIT CUSTOM

Registers the functions (SOURCE, ATT, VOL +/–,

SEEK +/–, VOICE, ON HOOK, OFF HOOK) to the

steering wheel remote control:

 Rotate the control dial to select the function

you want to assign to the steering wheel

remote control, then press it.

 While [REGISTER] is blinking, press and hold

the button on the steering wheel remote

control you want to assign the function to.

When registration is complete, [REGISTERED]

is displayed.

 To register other functions, repeat steps 

and .

(Available only when [STR CONTROL] is set to

[CUSTOM].)

RESET CUSTOM

Resets the setting of the steering wheel remote

control: [YES], [NO]. (Available only when [STR

CONTROL] is set to [CUSTOM].)

Notes

 While making settings, only button operation on

the unit is available. For safety, park your car

before making this setting.

 If an error occurs while registering, all the

previously-registered information remains. Restart

registration from the function where the error

occurred.

 This function may not be available on some

vehicles. For details on the compatibility of your

vehicle, visit the support site on the back cover.

CT (clock time)

Activates the CT function: [ON], [OFF].

BTM (best tuning memory) (page 10)

(Available only when the tuner is selected.)

FIRMWARE

Checks/updates the firmware version. For

details, visit the following support site:

http://esupport.sony.com/

FW VERSION (firmware version)

Displays current firmware version.

FW UPDATE (firmware update)

Enters firmware update process: [YES], [NO].

(Available only while the source is off and the

clock is displayed.)

Sound Setup (SOUND)

This setup menu is available when any source

except for the BT phone is selected.

C.AUDIO+ (ClearAudio+)

Reproduces sound by optimizing the digital

signal with the Sony recommended sound

settings: [ON], [OFF]. (Automatically sets to [OFF]

when [EQ10 PRESET] is changed and/or

[MEGABASS] is set to [1] or [2] and/or [DSO] is set

to [LOW], [MID] or [HIGH].)

EQ10 PRESET

Selects an equalizer curve from 10 equalizer

curves or off:

[OFF], [R&B], [ROCK], [POP], [DANCE], [HIP-HOP],

[ELECTRONICA], [JAZZ], [SOUL], [COUNTRY],

[CUSTOM].

The equalizer curve setting can be memorized

for each source.

EQ10 CUSTOM

Sets [CUSTOM] of EQ10.

Setting the equalizer curve: [BAND1] 32 Hz,

[BAND2] 63 Hz, [BAND3] 125 Hz, [BAND4] 250 Hz,

[BAND5] 500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz,

[BAND8] 4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz.

The volume level is adjustable in 1 dB steps,

from -6 dB to +6 dB.