Sony XDR-DS16iPN Podręcznik referencyjny
Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla System stereo Sony XDR-DS16iPN. Sony XDR-DS16iPN 2 stron. Personal audio system, dab, dab plus, made for ipod/iphone, avaliable on the app store, no power/no problem
Również dla Sony XDR-DS16iPN: Instrukcja uruchamiania (2 strony), Podręcznik referencyjny (2 strony), Podręcznik referencyjny (2 strony)
4-461-409-31(1)
Personal Audio
System
©2013 Sony Corporation
Printed in China
XDR-DS16iPN
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
English
by inappropriate waste handling of the battery.
The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
WARNING
connection with an incorporated battery, this
battery should be replaced by qualified service
To reduce the risk of fire or electric shock, do
staff only.
not expose this apparatus to rain or
To ensure that the battery will be treated properly,
moisture.
hand over the product at end-of-life to the
applicable collection point for the recycling of
To reduce the risk of fire, do not cover the
electrical and electronic equipment.
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place lighted
For all other batteries, please view the section on
candles on the apparatus.
how to remove the battery from the product
safely. Hand the battery over to the applicable
To reduce the risk of fire or electric shock, do not
collection point for the recycling of waste
expose this apparatus to dripping or splashing,
batteries.
and do not place objects filled with liquids, such
as vases, on the apparatus.
For more detailed information about recycling of
this product or battery, please contact your local
Do not install the appliance in a confined space,
Civic Office, your household waste disposal
such as a bookcase or built-in cabinet.
service or the shop where you purchased the
Do not expose the batteries (battery pack or
product.
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
Preparations
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
Power source
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
This unit contains a CR2032 battery as a backup
wall outlet, even if the unit itself has been turned
power source to keep the alarm operating during
off.
a power interruption (No Power No Problem
The nameplate and important information
system).
concerning safety are located on the bottom
When to replace the battery
exterior.
When the battery becomes weak, "" appears in
CAUTION
the display.
Danger of explosion if battery is incorrectly
If a power interruption occurs while the battery is
replaced. Replace only with the same type.
weak, the current time will be erased.
Replace the battery with a Sony CR2032 lithium
Notice for customers: the following
battery. Use of another battery may cause a fire or
information is only applicable to equipment
explosion.
sold in countries applying EU directives
To replace the battery
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan Minato-
1
Keep the AC plug connected to the AC
ku Tokyo, 108-0075 Japan. Inquiries related to
outlet, remove the screw of the battery
product compliance based on European Union
legislation shall be addressed to the authorized
compartment on the bottom of the unit,
representative, Sony Deutschland GmbH,
and open the lid (see Fig. ).
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
2
Remove the old battery and insert a new
For any service or guarantee matters, please refer
one in the battery compartment with the
to the addresses provided in the separate service
or guarantee documents.
side facing up (see Fig. ).
3
Replace the battery compartment lid and
On copyrights
tighten the screw.
iPhone, iPod, iPod nano, and iPod touch are
4
trademarks of Apple Inc., registered in the U.S.
Press , DAB/FM, AUDIO IN or
and other countries.
SNOOZE/BRIGHTNESS to turn "
" off
Lightning is a trademark of Apple Inc.
in the display.
"Made for iPod, " and "Made for iPhone" mean
that an electronic accessory has been designed to
Note
connect specifically to iPod or iPhone,
When you replace the battery, do not
respectively, and has been certified by the
disconnect the plug from the AC outlet.
developer to meet Apple performance standards.
Otherwise, the current date and current time
Apple is not responsible for the operation of this
will be erased.
device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod or iPhone may affect
wireless performance.
Note
This unit is not specified for use with an iPad,
and malfunction may result if used with one.
Precautions
To disconnect AC power, grasp the plug itself,
not the cord.
Since a strong magnet is used for the speaker,
keep credit cards using magnetic coding or
spring-wound watches, CRT-based TVs, or
projectors, etc., away from the unit to prevent
CR2032
possible damage from the magnet.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on a surface
(a rug, a blanket, etc.) or near materials (a
Remote control
curtain) which might block the ventilation holes.
Should any solid object or liquid fall into the
unit, unplug the unit and have it checked by
Before using the supplied remote for the first
qualified personnel before operating it any
time, remove the insulation film.
further.
Aim the remote at the
(Remote sensor) of the
During a thunderstorm, do not touch the
unit.
antenna (aerial) and plug.
Do not touch the unit with wet hands.
Do not place the unit anywhere near water.
NOTES ON LITHIUM BATTERY
Wipe the battery with a dry cloth to assure a
good contact.
Be sure to observe the correct polarity when
installing the battery.
When to replace the battery
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
With normal use, the battery (CR2025) should
last for about 6 months. When the remote can no
Note
longer operate the unit, replace the battery with a
In the Reference Guide, "iPod" is used as a
new one.
general reference to functions on an iPod or
iPhone, unless otherwise specified by the text
side facing up
or illustrations.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
Note
This symbol on the product or on its packaging
If you are not going to use the remote for a long
indicates that this product shall not be treated as
time, remove the battery to avoid any damage
household waste. Instead it shall be handed over
that may be caused by leakage or corrosion.
to the applicable collection point for the recycling
of electrical and electronic equipment. By
Operations
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
Setting the clock
could otherwise be caused by inappropriate waste
handling of this product. The recycling of
To set the clock for the first
materials will help to conserve natural resources.
For more detailed information about recycling of
time
this product, please contact your local Civic
Office, your household waste disposal service or
When you first purchase the unit, do the
the shop where you purchased the product.
following.
1
Applicable accessory: Remote control.
Remove the insulation film of the backup
Disposal of waste batteries
battery on the bottom of the unit.
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
2
Extend the wire aerial fully.
0.0005% mercury or 0.004% lead.
Supporter
Dock
Connector
Power cord
Remote sensor
Wire aerial
VOLUME + (VOL + on the remote control) and buttons have a tactile dot.
Notes on radio reception
3
Plug in the unit.
Keep digital music players or mobile phones
"Setting clock... " appears in the display, and
away from the aerial, as this may lead to
the time is set based on the received DAB
reception interference.
data. When finished, the current time appears
When you are listening to the radio with an
in the display.
iPhone connected to the unit, interference with
radio reception may occur.
When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
Tip
Notes
If an FM broadcast is noisy, press MENU and
Do not operate the unit before "Setting clock... "
SELECT or to select "Mode, " then press
disappears from the display.
DSPL/ENT (ENTER on the remote). Press
If the clock cannot be set as a result of no DAB
SELECT or to select "MONO" instead of
signal being received, "0:00, " year and date flash
"AUTO STEREO, " then press DSPL/ENT
in the display. The clock cannot be set. In this
(ENTER on the remote) again. To resume stereo
case, set Time synchronization to "iPod" or
reception, perform the above steps again.
"None" (for details, see "Time
synchronization").
Operating the radio
Time synchronization
You can synchronize time from DAB broadcasts
and iPod in clock mode.
The unit can receive DAB service and FM stations.
1
Press MENU and SELECT or to
1
Press DAB/FM repeatedly to select the
select "Synced Time By, " then press
desired band.
DSPL/ENT (ENTER on the remote).
Each press changes the band as follows:
2
Press SELECT or to select "DAB, "
"iPod" or "None, " then press DSPL/ENT
(ENTER on the remote).
If a list of receivable DAB broadcasts has not
Select "DAB" to synchronize time by DAB
been created when you select DAB,
(default).
"Scanning..." will appear in the display, and
Select "iPod" to synchronize time by iPod.
the unit starts scanning automatically.
Select "None" if time synchronization is not
2
Press TUNE +
or
– to tune to the desired
needed.
service or station.
3
Perform one of the following operations
If a selected DAB service has finished
according to your selection above:
broadcasting, sound stops and "NO
If "DAB" is selected, set the radio band to
SERVICE" appears. In this case, press
DAB.
TUNE + or – to select another service.
If "iPod" is selected, connect an iPod to the
3
Adjust the volume using VOLUME + or –
unit.
If "None" is selected, perform steps 2 to 4 in
(VOL + or – on the remote).
"To set the clock manually. "
To turn off the radio, press OFF.
To set the clock manually
Note on FM usage
The frequency step is set to 0.05 MHz on FM.
Do the following if you wish to set the clock
manually, instead of synchronizing time by DAB
Notes on DAB usage
or iPod.
"NO SERVICE" appears when the selected
1
Plug in the unit.
service cannot be received.
2
Press MENU and SELECT or to
DAB broadcasts with poor quality reception
may not be selected when Auto scan is
select "Date & Time, " then press DSPL/
performed. In this case, perform Manual tune,
ENT (ENTER on the remote).
which may improve reception.
The year flashes in the display.
3
About the SC (Secondary Component)
Press SELECT or to set the year, then
If the selected primary component has a
press DSPL/ENT (ENTER on the remote).
secondary component, ">>" lights up in the
4
Repeat step 3 to set the month, day, hour
display.
and minute.
Press TUNE + to receive the desired secondary
component. "<<" lights up while the secondary
The seconds start incrementing from zero.
component is being received.
Notes
Note
The clock setting is available in clock state only.
When the selected secondary component ends,
(When using radio, iPod or Audio-in, press
the unit returns automatically to the primary
OFF before setting the clock.)
component.
When "iPod" or "DAB" is selected in Time
synchronization, the clock will be overwritten
Preset tuning
via iPod or DAB time automatically. Select
You can preset up to 20 services in DAB and 20
"None" in step 2 to deactivate time
stations in FM.
synchronization via iPod or DAB.
When the clock is set via DAB, daylight saving
To preset a service or station
time (summer time) will be adjusted
1
Follow steps 1 to 2 in "Operating the
automatically. Otherwise, set daylight saving
radio" and manually tune in to the
time manually or via iPod.
station you want to preset.
When the clock is set via DAB, the clock will be
reset via DAB after a power interruption. The
2
Press MENU and SELECT or to
clock will not be reset if it has been set
select
Manual Preset
then press DSPL/
"
, "
manually or via iPod.
ENT (ENTER on the remote).
If you do not press any button for about
3
1 minute while setting the clock, the clock
Press PRESET
+ or –
to select the desired
setting will be cancelled.
preset number, and press DSPL/ENT
An 87-year calendar (2013-2099) is installed in
(ENTER on the remote).
the unit. When the date is set, the day of the
The service or station is stored.
week is automatically displayed.
MON = Monday, TUE = Tuesday,
Notes
WED = Wednesday, THU = Thursday,
To preset another service or station, repeat
FRI = Friday, SAT = Saturday, SUN = Sunday
these steps.
To change the time format
To go back to the previous status, press MENU
You can choose a time format between 24-hour
instead of DSPL/ENT (ENTER on the remote)
system (default) and 12-hour system.
in step 2.
1
Press MENU and SELECT or to
To change a preset service or station, tune in to
the desired service or station, then repeat steps
select "Time Format, " then press DSPL/
1 to 3. The new service or station will replace
ENT (ENTER on the remote).
the previous service or station.
2
Press SELECT or to select the desired
To tune in to a preset service or station
time format, then press DSPL/ENT
1
Press DAB/FM repeatedly to select the
(ENTER on the remote).
The time format toggles between 12-hour
desired band.
system ("AM 12:00" = midnight) and 24-hour
2
Press PRESET + or – to select the desired
system ("0:00" = midnight).
preset number.
To change the date format
When the service or station is not registered,
1
Press MENU and SELECT or to
"PRESET BLANK" appears in the display.
The preset service or station can also be
select "Date Format, " then press DSPL/
selected by PRESET + or –.
ENT (ENTER on the remote).
Adjust the volume using VOLUME + or –
2
Press SELECT or to select the desired
(VOL + or – on the remote).
date format, then press DSPL/ENT
(ENTER on the remote).
Notes
If there are no preset stations, "PRESET
To display the year and date when using
BLANK" will appear when you press PRESET +
the radio
or –.
Press DATE.
If there is only one preset station, its preset
After a few seconds, the display will change back
number will flash each time you press PRESET
to the current service or station automatically.
+ or –.
Auto preset tuning (FM only)
Improving the reception
1
Press DAB/FM repeatedly to select the
FM band.
DAB Band-III/FM
2
Press MENU and SELECT or to
Extend the wire aerial fully to increase reception
sensitivity.
select "Auto Preset, " then press DSPL/
Keep the wire aerial away from the power cord.
ENT (ENTER on the remote).
Do not bundle the wire aerial and power cord
3
Press SELECT or to select "Yes, " then
together.
press DSPL/ENT (ENTER on the remote).
For DAB reception, press DSPL/ENT to show the
signal strength in order to adjust the aerial for
The unit automatically presets the available
optimum reception.
channels for FM in order.
Tip
To stop auto preset tuning, press OFF.
Scan tuning (FM only)
The preset number or "--" flashes in the
display.
The unit automatically scans FM stations.
3
Press TIME SET + or – to set a preset
1
Press DAB/FM repeatedly to select the
number or "--" as the station to be used
FM band.
as the alarm sound.
2
Press and hold TUNE + or –.
"DAB --" or "FM --" indicates the last station
received.
+ : scans up through the frequency bands.
– : scans down through the frequency bands.
Tips
Scanning starts from the currently-tuned
If the selected preset number is not set,
frequency. When a station is received,
"PRESET BLANK" flashes twice, then
scanning stops.
"ALARM VOLUME:" and the volume level
3
Adjust the volume using VOLUME + or –
indication flash in the display. Then jump to
(VOL + or – on the remote).
the step 5.
If there is no last station, "NO LAST
STATION" flashes twice, then "ALARM
How to handle an iPod
VOLUME:" and the volume level indication
5
flash in the display. Then jump to the step
.
4
Press ALARM SET A or B.
To set an iPod
"ALARM VOLUME:" and the volume level
indication flash in the display.
5
Press TIME SET + or – to adjust the
volume.
6
Press ALARM SET A or B.
The setting is entered.
7
If "A" or "B" does not appear in the
display, press ALARM SET A or B
again.
The radio will turn on at the set time.
To set the buzzer alarm
To remove an iPod
1
Perform steps 1 to 8 in "To set the alarm. "
2
Press ALARM SET A or B to select
"BUZZER" alarm mode.
The setting is entered.
3
If "A" or "B" does not appear in the
display, press ALARM SET A or B
again.
The buzzer will sound at the set time.
Note
The volume of the buzzer is not adjustable.
Notes
An iPod in a case or cover can be set on this
To confirm an alarm time setting
unit. However, if the case or cover interferes
Press TIME SET + or –. The setting will be
with the connection, remove the case or cover
displayed for about 4 seconds.
before setting the iPod on the Dock Connector.
To change an alarm setting
Set the iPod onto the Dock Connector firmly.
When placing or removing the iPod, hold it at
Press and hold TIME SET + for at least 2 seconds
the same angle as the Dock Connector on the
to move the alarm time forwards. Press and hold
unit. Do not pull the iPod forward too far.
TIME SET – for at least 2 seconds to move the
When placing or removing the iPod, hold the
alarm time back.
unit securely.
When you release the button, the changed time
Do not twist or bend the iPod, as this may
will flash for about 2 seconds. To change the
result in connector damage.
alarm time again, press TIME SET + or – within
Remove the iPod when transporting it;
these 2 seconds, otherwise the setting change will
otherwise, a malfunction may result.
be fixed as displayed.
To doze for a few more minutes
Operating an iPod
Press SNOOZE/BRIGHTNESS.
The sound turns off but will automatically come
1
Set the iPod on the Dock Connector.
on again after about 10 minutes.
You can change the snooze time by pressing
The Dock Connector can be tilted slightly.
SNOOZE/BRIGHTNESS repeatedly within 4
For details, see "How to handle an iPod. "
2
seconds.
Press .
The maximum length of the snooze time is 60
The iPod begins to play back.
minutes.
If the iPod does not start playing back, operate
directly on the iPod.
You can operate the connected iPod via this
unit or the iPod itself.
3
To stop the snooze timer, press OFF.
Adjust the volume using VOLUME + or –
(VOL + or – on the remote).
To stop the alarm
Press OFF to stop the alarm.
To
Press
The alarm will sound again at the same time the
Turn off the iPod
OFF, or press and
next day.
hold
To deactivate the alarm
Pause playback
To resume
Press ALARM ON/OFF A or B to turn off the
playback, press it
alarm A or B indicator in the display.
again.
To activate the alarm
Go to the next track
(forward)
Press ALARM ON/OFF A or B to turn on the
Go back to the previous
(backward)*
alarm A or B indicator in the display.
track
Locate a point while
Notes
(forward) or
listening to the sound
When the alarm is set as iPod, only the buzzer
(backward)
alarm will sound if there is no iPod on the Dock
while playing and
Connector, music is not stored in the iPod, or
hold it until you
the iPod touch/iPhone is turned off.
find the point.
If the selected preset number is not set, or there
Go back to the previous
MENU
is no last station, the buzzer will sound when
menu
alarm time is met. If you want to change the
Select a menu item or a
(up)/ (down)
buzzer alarm, set a preset station or tune to a
track for playback
on the remote
radio station (see "Operating the radio").
Execute the selected menu
DSPL/ENT
If the same alarm time is set for both alarm A
or begin playback
(ENTER on the
and B, alarm A takes priority.
remote)
If no operation is performed while the alarm is
occurring, the alarm will stop after about
*
During playback, this operation returns you to
60 minutes.
the beginning of the current track. To go back
to the previous track, press twice.
Note on the alarm in the event of a power
interruption
Notes
In the event of a power interruption, the buzzer
If a pop-up message appears in the display of
alarm will last about 5 minutes if the battery is not
the iPod touch or iPhone, see "About App. "
weak.
Some operations may differ or may not be
However, certain functions will be affected as
available on some models of iPod.
follows:
If the iPod is already playing when set onto the
The backlight will not light up.
unit, the sound from the iPod will be output
If the alarm mode is set to iPod or radio, it will
from the unit speakers, even if the unit was
change to buzzer automatically.
playing sound from another function.
If OFF/ALARM RESET is not pressed, the alarm
If the battery of the iPod is extremely low,
will sound for about 5 minutes.
charge it for a while before operation.
If "
" appears in the display, the alarm will not
Sony cannot accept responsibility in the event
sound in the event of a power interruption.
that data recorded to an iPod is lost or damaged
Replace the battery if "
" appears.
when using the iPod connected to this unit.
The snooze function cannot be set during a
For details of environmental conditions for
power interruption.
operating an iPod, check the website of Apple
During a power interruption, each alarm will
Inc.
sound at the set time only once.
To remove the iPod
For details, see "How to handle an iPod. "
Setting the sleep timer
To charge an iPod
You can fall asleep to music, etc., using the sleep
You can use the unit as a battery charger for an
timer. The unit stops playback or the radio
iPod.
automatically after a preset duration.
Charging begins when the iPod is connected to
1
Press SLEEP while the unit is turned on.
the unit. The charging status appears in the
"SLEEP:" and the sleep time flash in the
display of the iPod. For details, refer to the user's
guide of the iPod.
display.
2
Press SLEEP to set the sleep timer
duration.
Setting the alarm
Each time you press SLEEP, the duration (in
minutes) changes as follows:
This unit is equipped with 3 alarm modes—iPod,
radio and buzzer. The clock needs to be set before
the alarm can be set (see "To set the clock for the
first time").
The display returns to clock mode for about
To set the alarm
4 seconds after you have finished the duration
setting and released SLEEP, then the sleep
1
timer starts.
Press and hold ALARM SET A or B.
The unit plays for the duration you set, then
"Alarm–A Setting" or "Alarm–B Setting"
stops.
appears and the hour flashes in the display.
2
To turn off the unit before the preset
Press TIME SET + or – repeatedly until
time
the desired hour appears.
Press OFF.
To cycle the hour rapidly, press and hold TIME
To change the sleep timer setting
SET + or –.
3
You can press SLEEP repeatedly to select the
Press ALARM SET A or B.
desired sleep timer setting, even after the sleep
The minute flashes.
timer has been activated.
4
Repeat step 2 to set the minute.
To deactivate the sleep timer
5
Press ALARM SET A or B.
Press SLEEP repeatedly to set the sleep timer to
The days of the week flash.
"OFF" in step 2.
6
Repeat step 2 to set the days of the week.
You can select the day from the following
Connecting optional
three options by pressing TIME SET + or – :
EVERYDAY: MON TUE WED THU FRI SAT
component
SUN
WEEKDAY: MON TUE WED THU FRI
WEEKEND: SAT SUN
To listen to sound
7
Press ALARM SET A or B.
You can enjoy the sound from an optional
component, such as a portable digital music player,
The alarm mode setting is entered.
through the speakers of this unit. Be sure to turn
8
Press TIME SET + or – repeatedly until
off the power of each component before making
the desired alarm mode flashes.
any connections.
You can choose one of 4 settings: "iPod, "
1
Firmly connect the line output jack of the
"DAB, " "FM" or "BUZZER. "
portable digital music player (or other
Set the alarm mode as follows:
component) to the AUDIO IN jack on the
– iPod: see " To set the alarm as iPod. "
back of the unit, using a suitable audio
– DAB or FM: see " To set the radio alarm. "
– BUZZER: see " To set the buzzer alarm. "
connecting cable (not supplied).
2
To set the alarm as iPod
Press AUDIO IN to activate the Audio-in
function.
1
Perform steps 1 to 8 in "To set the alarm. "
"AUDIO IN" appears in the display.
2
Press ALARM SET A or B to select
3
Turn the connected component on.
alarm mode for "iPod. "
4
Play the connected component.
"ALARM VOLUME:" and the volume level
The sound from the connected component is
indication flash in the display.
output from the speakers of this unit.
3
Press TIME SET + or – to adjust the
5
Adjust the volume using VOLUME + or –
volume.
(VOL + or – on the remote).
4
Press ALARM SET A or B.
To return to the radio
The setting is entered.
Press DAB/FM.
5
If "A" or "B" does not appear in the
To return to the iPod
display, press ALARM SET A or B
Press .
again.
The iPod will sound at the set time.
To stop listening
Press OFF and stop playback on the connected unit.
When using an iPod touch/iPhone
To wake up to music stored in an iPod touch/
Notes
The MENU cannot be operated while Audio-in
iPhone, connect the iPod touch/iPhone to the
is used.
unit first, follow the steps above to set alarm
The necessary type of audio connecting cable
time, then select the music function.
depends on the optional component. Be sure to
Even if the alarm setting for iPod is complete, if
use the correct type of cable.
you turn the iPod touch/iPhone power off after
If the volume level is low, adjust the volume of
inserting the iPod touch/iPhone into the unit,
the unit first. If the volume is still too low, adjust
the alarm will be the buzzer.
the volume of the connected component.
To set the radio alarm
Disconnect the audio connecting cable from the
unit when it is not in use.
1
Perform steps 1 to 8 in "To set the alarm. "
When you listen to the radio with an optional
2
Press ALARM SET A or B to select the
component connected, turn off the connected
component to prevent noise. If noise occurs,
radio band ("DAB" or "FM").
even when the component is turned off,
disconnect and place the optional component
away from the unit.
Preset number
Other useful functions
Programme type
Display
Travel
Travel
Leisure
Leisure
Other useful functions
Jazz Music
Jazz and Blues
Country Music
Country Music
for DAB
National Music
National Music
Oldies Music
Oldies Music
To change the display
To change the display mode, press DSPL/ENT
Folk Music
Folk Music
during DAB reception. The selected display mode
Documentary
Documentary
remains even if you turn the unit off and on
again, or change the band.
The display can be up to 16 characters. A dynamic
Enjoying the bass or
label can be up to 128 characters.
Each time you press DSPL/ENT, the display
expansion sound effect
changes as follows:
Function and Preset number
Bass and expansion sound effects can be selected
as desired by pressing SOUND.
Each time you press the button, the sound effect
changes as follows:
"MEGA BASS": Provides high quality bass sound.
"MEGA BASS" and "MEGA Xpand": Enables
Component Label
both effects.
"MEGA Xpand": Expands the sound field width.
To return to standard sound, press the button
Dynamic
until the display of the sound effect disappears.
Setting the brightness
of the display
PTY (Programme Type)
Four levels of brightness are available by pressing
SNOOZE/BRIGHTNESS. Each time you press the
button, the brightness changes as follows:
Even if brightness level is set to off, it will change
Ensemble
to Low while the alarm is occurring.
Press and hold SNOOZE/BRIGHTNESS to set the
brightness to off directly.
About App
Channel/Frequency/Signal Strength
A dedicated Dock App for iPod touch/iPhone
available at Apple App Store.
Search for "D-Sappli" and download the free App
to find out more about the functions.
Features
D-Sappli includes various timer functions:
Music Play Timer and Sleep Timer.
Broadcasting type/Bit/Mode
Music Play Timer allows you to play/pause
desired music at a desired time. Sleep Timer
allows you to specify a time at which to stop
music playback.
Music Play Timer and Sleep Timer are available
only when D-Sappli is activated.
DAB broadcasting: MP2
D-Sappli can display a list of Radio Preset
DAB
broadcasting: AAC
+
Stations programmed in this unit.
You can rename the FM Radio Preset Stations,
Notes
and change their preset numbers on the
If there is no dynamic label, the lower line of
D-Sappli. Preset numbers and order will also be
the display is blank.
changed accordingly in the unit.
Depending on the broadcasting station, the
D-Sappli also includes a clock display enlarge
characters in the dynamic label may not be
feature.
displayed properly.
Manual tune
Notes
This function allows you to tune and add various
If the App to link with this unit is not
DAB Band-III channels to your station list.
downloaded to the iPod touch/iPhone, a pop-
This function can be used to assist the positioning
up message prompting you to download D-
of the aerial or the unit to obtain the optimum
Sappli may appear repeatedly.
reception for a specific channel/frequency.
Deactivate the App's link function to stop the
1
Press DAB/FM repeatedly to select the
pop-up message.
To deactivate the App's link function: Remove
DAB band.
the iPod touch/iPhone from the Dock
2
Press MENU and SELECT or to
Connector. Press (to enter the function for
select "Manual Tune, " then press DSPL/
iPod). Press MENU, then press DSPL/ENT
ENT (ENTER on the remote).
(ENTER on the remote). Press or to select
"OFF, " then press DSPL/ENT (ENTER on the
3
Press SELECT or to select the desired
remote).
DAB channel, then press DSPL/ENT
To re-activate the App's link function, repeat the
(ENTER on the remote).
above steps and select "ON" instead of "OFF" in
The signal strength bars move left and right as
the last step.
you adjust reception.
4
Press DSPL/ENT (ENTER on the
General information
remote).
Notes
Specifications
If the signal of the selected DAB service cannot
be received, no signal strength bars will be
Time display
displayed. In this case, press MENU to select
another channel.
Switching between 24-hour system (default) and
The larger signal strength bar indicates the
12-hour system
audio quality threshold. If the signal strength
iPod
drops below this threshold, the audio quality
DC out: 5V
will deteriorate.
MAX: 1A
A station name is saved to the station list when
Radio
the station name starts scrolling in step 3.
Frequency range
DRC value (DYNAMIC RANGE CONTROL)
Band
Frequency
Frequency step
DRC can make quieter sounds easier to hear
when the unit is used in a noisy environment.
DAB
174.928 MHz -
For DAB broadcasts with dynamic range
(Band-III)
239.200 MHz
compression, you can adjust the dynamic range.
1
FM
87.5 MHz -
0.05 MHz
Press DAB/FM repeatedly to select the
108 MHz
DAB band.
2
Press MENU and SELECT or to
DAB (Band-III) frequency table (MHz)
select "DRC Value, " then press DSPL/
No.
Channel
Frequency
ENT (ENTER on the remote).
1
5A
174.928
3
Press SELECT or to select the DRC
2
5B
176.640
level.
3
5C
178.352
The DRC level changes as follows:
4
5D
180.064
5
6A
181.936
4
Press DSPL/ENT (ENTER on the
6
6B
183.648
remote).
7
6C
185.360
Notes
8
6D
187.072
DRC is effective only for broadcasts with
9
7A
188.928
dynamic range compression.
When you adjust the DRC level, sounds can be
10
7B
190.640
heard more clearly.
11
7C
192.352
Auto scan
12
7D
194.064
This function allows you to automatically scan
and create a list of receivable DAB broadcasts.
13
8A
195.936
1
Press DAB/FM repeatedly to select the
14
8B
197.648
DAB band.
15
8C
199.360
2
Press MENU and SELECT or to
16
8D
201.072
select "Auto Scan, " then press DSPL/ENT
17
9A
202.928
(ENTER on the remote).
3
Press SELECT or to select "Yes, " then
18
9B
204.640
press DSPL/ENT (ENTER on the remote).
19
9C
206.352
"Scanning... " appears in the display.
20
9D
208.064
Auto scan takes about 30 - 90 seconds,
depending on the signal strength and station
21
10A
209.936
number. When finished, the unit creates a list in
22
10B
211.648
alphabetical order.
23
10C
213.360
Tip
24
10D
215.072
To cancel Auto scan, press MENU while
processing.
25
11A
216.928
Note
26
11B
218.640
When Auto scan is performed, the existing list
27
11C
220.352
will be updated and the preset services will be
cleared. In this case, preset your favourite
28
11D
222.064
services again.
29
12A
223.936
Trim stations
30
12B
225.648
You can delete the stations that are not currently
being received.
31
12C
227.360
1
Press DAB/FM repeatedly to select the
32
12D
229.072
DAB band.
33
13A
230.784
2
Press MENU and SELECT or to
34
13B
232.496
select "Prune, " then press DSPL/ENT
35
13C
234.208
(ENTER on the remote).
36
13D
235.776
When finished, "FINISH!" appears for about
1 second, then changes to the current station
37
13E
237.488
automatically.
38
13F
239.200
Select station
Another service can be selected while listening to
General
a broadcast.
Speaker
1
Press MENU and SELECT or to
Approx. 57 mm dia. 6 Ω (2)
select "Select Station, " then press DSPL/
Input
ENT (ENTER on the remote).
AUDIO IN jack (ø 3.5 mm stereo minijack)
2
Press SELECT or to select a desired
Power output
service, then press DSPL/ENT (ENTER
3.5 W + 3.5 W (at 10% harmonic distortion)
on the remote).
Power source
230 V AC, 50 Hz
PTY (Programme Type)
For clock back up: 3V DC, CR2032 battery (1)
Dimensions
This function indicates services in programme
Approx. 290 mm × 165 mm × 145 mm (w/h/d)
type, such as NEWS, SPORTS of the PTY list,
including projecting parts and controls
transmitted in a DAB broadcast.
Mass
Programme type
Display
Approx. 1.65 kg including power supply unit
No programme type
None
Supplied accessories
News
News
Remote control (with a lithium battery) (1)
Current Affairs
Current Affairs
Startup Guide (1)
Information
Information
Reference Guide (this document) (1)
Sport
Sport
Compatible iPod/iPhone
Education
Education
models
Drama
Drama
The compatible iPod/iPhone models are as
Culture
Arts
follows.
Science
Science
Update the software of the iPod/iPhone to the
Varied
Talk
latest version before using it with this unit.
Pop Music
Pop Music
iPod touch (5th generation)
Rock Music
Rock Music
iPod nano (7th generation)*
Easy Listening Music
Easy Listening
iPhone 5
Light Classical
Light Classical
Serious Classical
Classical Music
Other Music
Other Music
Weather/meteorology
Weather
Finance/Business
Finance
*
The iPod nano (7th generation) cannot be
controlled by the remote when the command of
Children's programmes
Children's
"MENU, " ", " ", " and "ENTER" is pressed.
Social Affairs
Factual
Design and specifications are subject to change
Religion
Religion
without notice.
Phone In
Phone In
Troubleshooting
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
The clock flashes "AM 12:00" or "0:00" due to
a power interruption.
The battery is low. Replace the battery. Remove
the old battery and install a new one.
Be sure to remove the insulation film of the
backup battery before use.
The alarm of the radio, iPod or buzzer does
not sound at the preset alarm time.
Check that alarm "A" or alarm "B" is properly
displayed.
The alarm of the radio or iPod is activated
but no sound comes on at the preset alarm
time.
Check the alarm volume setting.
There is no sound from the iPod.
Make sure the iPod is securely connected.
Adjust the VOLUME + or – (VOL + or – on the
remote).
The iPod cannot be operated with this unit.
Make sure the iPod is securely connected.
Check that the iPod is compatible with this unit
(see "Compatible iPod/iPhone models").
The iPod cannot be charged.
Make sure the iPod is securely connected.
Check that the iPod is compatible with this unit
(see "Compatible iPod/iPhone models").