Sony ZS-BTG905 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony ZS-BTG905. Sony ZS-BTG905 2 stron. Personal audio system
Drukuj stronę
Other Operations
Unit
Using the display
Presetting radio stations
You can check information about the currently
You can store radio stations in the unit's memory.
playing audio file from the disc/USB device using
You can preset up to 30 radio stations, 20 for FM
the display.
and 10 for AM.
1
Press RADIO FM/AM
AUTO PRESET
Information about the total number of
repeatedly to select the band.
tracks and the playing time of an audio
CD
2
Hold down RADIO FM/AM
PRESET until "AUTO" flashes on the
After the CD is loaded and the reading process is
completed, the total number of tracks and the
display.
total playing time are displayed.
Total number of tracks
3
Press ENTER to store the station.
The stations are stored in memory from lower
Total playing time
frequencies to higher ones.
Information about the total number of
If a station cannot be preset
folders on an MP3/WMA disc
automatically
After the MP3/WMA disc is loaded and the
You need to preset a station with a weak signal
reading process is completed, the total number
manually.
of folders is displayed. The total number of files
1
AUTO PRESET
Press RADIO FM/AM
and the total playing time are not displayed.
repeatedly to select the band.
(Example: MP3 disc)
2
Tune to a station you want.
3
Press MANUAL PRESET .
The band selected ("FM-xx" or "AM-xx")
appears on the display.
Total number of folders
To check MP3/WMA/AAC file information
Press DISPLAY repeatedly while playing a
disc/USB device. The display changes as follows:
4
Press PRESET or + until the preset
Song title ( )*
1
number you want for the station flashes
on the display.
Artist name ( )*
1
Album name ( )*
1
Current file number and playing time*
2
*
1
If the file does not have corresponding ID3
information, the file name, "NO ARTIST," and "NO
5
Press ENTER to store the station.
ALBUM" scroll.
If another station is already assigned to the
*
The artist name or album name will change to this
2
selected preset number, that station is
in a few seconds.
replaced by the new one.
Selecting play mode
You can set the unit to play tracks/files
repeatedly or in random order on a disc/USB
device.
Tip
Press MODE repeatedly while a disc/USB
The preset radio stations remain in the unit's
memory even in the following situations.
playback is stopped.
The AC power cord is unplugged.
ˎ
Each time you press the button, the indication
The batteries are removed.
ˎ
changes as follows:
Normal play (None)
Listening to the radio from
Single repeat (
1)
preset radio stations
All repeat ( )
1
Press RADIO FM/AM
AUTO PRESET
repeatedly to select the band.
Selected folder play (
)*
2
Press PRESET or + to select the
Selected folder repeat play (
,
)*
radio station's stored preset number.
Shuffle play (SHUF)
* These functions are available only for MP3/WMA/
AAC files.
To repeat
Do this
A single track/
1 Press MODE repeatedly
MP3/WMA/AAC
until "
1" appears.
file
2 Press or to
select an audio file that you
want to repeat.
3 Press to start Repeat
Play.
All tracks/MP3/
1 Press MODE repeatedly
WMA/AAC files
until " " appears.
2 Press to start Repeat
Play.
A selected
1 Press MODE repeatedly
folder on a disc
until " " (Folder) and " "
or USB device
appear.
2 Select the folder by
pressing
or + .
3 Press to start Repeat
Play.
Note
During Shuffle Play mode, you cannot select the
previous track/file by pressing , nor select a
+ or .
folder by pressing
Precautions
Discs that this unit CAN play
Remote
ˎ Audio CD (CD-DA*
ˎ
ˎ CD-R/CD-RW that contains MP3/WMA files and
ˎ
is finalized*
*
1
CD-DA is the abbreviation for Compact Disc Digital
Audio. It is a recording standard used for audio
CDs.
*
2
Finalizing is the process to make the CD-R/CD-RW
discs playable on the consumer disc player
products, and the finalizing can be enabled or
disabled as optional settings during disc creation
in most recording software.
Discs that this unit CANNOT play
ˎ CD-R/CD-RW other than those recorded in
ˎ
audio CD format or formats conforming to ISO
9660 Level 1/Level 2 or Joliet
ˎ CD-R/CD-RW of poor recording quality, CD-R/
ˎ
CD-RW with scratches or that is dirty, or CD-R/
CD-RW recorded using an incompatible
recording device
ˎ CD-R/CD-RW that is unfinalized or finalized
ˎ
incorrectly
Notes on discs
ˎ Before playing, clean the CD with a
ˎ
cleaning cloth. Wipe the CD from
the center out. If there are
scratches, dirt or fingerprints on
the CD, a tracking error may occur.
ˎ Do not use solvents such as
ˎ
* (on the unit and remote)
benzine, thinner, commercially
and VOLUME + (on the
available cleaners or anti-static
remote) have a tactile dot.
spray intended for vinyl LPs.
ˎ Do not expose the CD to direct sunlight or heat
ˎ
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
ˎ Do not stick paper or a sticker on the CD, or
ˎ
scratch the surface of the CD.
Setting the Sleep Timer
ˎ After playing, store the CD in its case.
ˎ
Note on DualDiscs
You can fall asleep while listening to the radio or
music from the connected device using the sleep
ˎ A DualDisc is a two sided disc product which
ˎ
timer.
mates DVD recorded material on one side with
The unit turns off automatically after a preset
digital audio material on the other side.
duration.
However, since the audio material side does
not conform to the Compact Disc (CD)
1
Play the music source you want.
standard, playback on this product is not
AUTO
2
Press SLEEP repeatedly to select the
guaranteed.
sleep time duration.
Music discs encoded with copyright
Each time you press the button, the indication
protection technologies
changes as follows:
ˎ This product is designed to playback discs that
ˎ
AUTO*
60MIN
30MIN
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
OFF
10MIN
20MIN
copyright protection technologies are
marketed by some record companies. Please
* For the CD or USB function, the unit turns off
be aware that among those discs, there are
automatically when playback finishes or after
some that do not conform to the CD standard
90 minutes. When using the BLUETOOTH, radio
or AUDIO IN function, the unit turns off after 90
and may not be playable by this product.
minutes.
On safety
The sleep time duration is displayed for a few
seconds, then the display returns to the
ˎ As the laser beam used in the CD player
ˎ
previous indication. When the setting
section is harmful to eyes, do not attempt to
becomes effective, the display will dim and
disassemble the casing. Refer servicing to
the light sync function will turn off.
qualified personnel only.
When the preset time has passed, the unit
ˎ Should any solid object or liquid fall into the
ˎ
turns off automatically.
unit, unplug the unit, and have it checked by
qualified personnel before operating it any
Note
further.
Music playback on a device connected to the
ˎ Discs with non-standard shapes (e.g., heart,
ˎ
AUDIO IN jack does not stop automatically. To
stop playback on the connected device, operate
square, star) cannot be played on this unit.
the connected device.
Attempting to do so may damage the unit. Do
not use such discs.
To cancel the sleep function
On power sources
Press SLEEP repeatedly to select "OFF."
ˎ For AC operation, use the supplied AC power
ˎ
cord; do not use any other cord.
Connecting optional
ˎ Unplug the unit from the wall outlet if it is not
ˎ
to be used for an extended period of time.
components
ˎ When not using the batteries, remove them to
ˎ
avoid damage that can be caused by battery
You can enjoy the sound from an optional
leakage or corrosion.
component, such as a portable digital music
player, through the speakers of this unit.
On placement
Be sure to turn off the power of each component
ˎ Do not leave the unit in a location near heat
ˎ
before making any connections.
sources, in a place subject to direct sunlight,
For details, refer to the instruction manual of the
excessive dust or mechanical shock, or in a car
component to be connected.
subject to the direct rays of the sun.
ˎ Do not place the unit on an inclined or
ˎ
unstable surface.
ˎ Do not place anything within 10 mm of the rear
ˎ
of the cabinet. The ventilation openings must
be unobstructed for the unit to operate
properly and prolong the life of its
components.
To AUDIO
ˎ Since a strong magnet is used for the speakers,
ˎ
IN jack
keep personal credit cards using magnetic
To component
(e.g., portable
coding or spring-wound watches away from
the unit to prevent possible damage from the
digital music
Audio connection cable
magnet.
player)
(not supplied)
On operation
1
Connect the AUDIO IN jack to the line
ˎ Condensation may form on outer surfaces or
ˎ
output jack of the portable digital music
internally, and cause the unit to malfunction if
the unit is suddenly moved from a cold to a
player or other component, using an
warm environment. If condensation forms, turn
audio connection cable (not supplied).
off the unit, and leave the unit off until the
2
Turn the connected component on.
moisture evaporates. Do not use the unit until
the condensation has fully evaporated.
3
Press AUDIO IN and start playing
sound on the connected component.
On cleaning the cabinet
The sound from the connected component is
ˎ Clean the cabinet, panel and controls using a
ˎ
output from the speakers.
soft cloth slightly moistened with a mild
To connect the unit to a TV or VCR, use an
detergent solution. Do not use any type of
extension cable (not supplied) with a stereo-
abrasive pad, scouring powder, or solvent, such
mini jack on one end and two phono plugs on
as alcohol or benzine.
the other end.
On BLUETOOTH communication
Notes
ˎ BLUETOOTH wireless technology operates
ˎ
ˎ If connected to the monaural output jack of a
ˎ
digital music player, sound may not come through
within a range of about 10 meters.
The maximum communication range may vary
the right speaker of the unit.
depending on obstacles (human body, metal,
ˎ If connected to the line output jack of a digital
ˎ
wall, etc.) or the electromagnetic environment.
music player, distortion may occur. If the sound is
distorted, connect to the headphones jack of a
digital music player instead.
ˎ If connected to the headphones jack of a digital
ˎ
music player, increase the volume of the digital
music player, and then adjust the volume of the
unit.
ˎ The following conditions may affect the
ˎ
sensitivity of BLUETOOTH communication.
There is an obstacle such as a person, metal,
ˎ
or wall between this unit and the BLUETOOTH
device used.
Devices or equipment such as wireless LAN
ˎ
devices, microwave oven, cordless telephone,
etc., using a 2.4 GHz frequency band, are in
use near the unit.
The unit is placed on a shelf made of steel.
ˎ
ˎ Because both the BLUETOOTH and the wireless
ˎ
LAN (IEEE802.11b/g/n) devices use the same
frequency band (2.4 GHz), microwave
interference may occur, resulting in
communication speed deterioration, noise, or
invalid connection if this unit is used near
wireless LAN devices. In such cases, do the
following.
If this unit is used within 10 m of other
ˎ
wireless LAN devices, turn off the wireless
LAN devices if possible, or place this unit at
least 10 m away from the wireless LAN
devices.
Use the BLUETOOTH device as close to the
ˎ
unit as possible.
ˎ Microwaves emitting from a BLUETOOTH
ˎ
device may affect the operation of electronic
medical devices. Turn off the power on this unit
and the BLUETOOTH device in the following
locations, as they may cause an accident.
Where inflammable gas is present, in a
ˎ
hospital, train, airplane, or a petrol station
Near automatic doors or a fire alarm
ˎ
ˎ This unit supports security capabilities that
ˎ
comply with the BLUETOOTH standard to
provide a secure connection when BLUETOOTH
wireless technology is used, but security may
be insufficient, depending on the setting. Be
careful when communicating using
BLUETOOTH wireless technology.
ˎ Sony cannot accept any responsibility for
ˎ
leakage of information when using the
BLUETOOTH function of this unit.
ˎ Connection with all BLUETOOTH devices cannot
ˎ
be guaranteed.
BLUETOOTH devices used with this unit must
ˎ
conform to the BLUETOOTH standard
specified by Bluetooth SIG, Inc., and must be
certified to comply.
Even when the connected BLUETOOTH device
ˎ
conforms to the above mentioned
BLUETOOTH standard, some devices may not
be connected or work correctly, depending
on the features or specifications of the
device.
ˎ Depending on the device to be connected, it
ˎ
may require some time to start
communication.
If you have any questions or problems
concerning your unit, consult your nearest Sony
dealer.
Troubleshooting
General
tracks)
1
"LIGHT SYNC DEMO MODE" appears on
the display.
2
correctly.
ˎ With the unit turned on, set the automatic
ˎ
demonstration off by pressing MODE until
"DEMO MODE OFF" appears on the display.
The unit does not turn on when the AC
power cord is connected.
ˎ Make sure the AC power cord is connected to
ˎ
the wall outlet securely.
The unit does not turn on during battery
operation.
ˎ Make sure the batteries are inserted correctly.
ˎ
There is no sound.
ˎ Make sure the appropriate function is selected
ˎ
for the music or sound source you want to
listen to.
The sound is noisy.
ˎ Is someone using a mobile phone or other
ˎ
equipment emitting radio waves near the unit?
If so, move the unit and the BLUETOOTH device
away from such devices. Devices such as
mobile phones, etc., can affect BLUETOOTH
communication.
CD/MP3/WMA player
The CD player does not play or "NO DISC"
is displayed even when a CD is in place.
ˎ Place the CD with the label side up.
ˎ
ˎ Clean the CD.
ˎ
ˎ Take out the CD and leave the CD
ˎ
compartment open for about an hour to dry
any condensation.
ˎ The CD-R/CD-RW may be blank or unfinalized.
ˎ
ˎ There are no playable MP3/WMA files on the
ˎ
disc.
ˎ There is a problem with the quality of the
ˎ
CD-R/CD-RW, recording device or application
software.
ˎ Replace all the batteries with new ones if they
ˎ
are exhausted.
The sound drops out (stops briefly).
ˎ Reduce the volume.
ˎ
ˎ Clean the CD, or replace it if the CD is badly
ˎ
damaged.
ˎ Place the unit in a location free from vibrations.
ˎ
ˎ Clean the audio laser lens with a commercially
ˎ
available blower.
ˎ The sound may drop out or noise may be
ˎ
heard when using a poor quality CD-R/CD-RW
or if there is a problem with the recording
device or application software.
Starting playback takes more time than
usual.
ˎ The following discs take a longer time to start
ˎ
playback.
A disc recorded with a complicated tree
ˎ
structure.
A disc that has many folders or non-MP3/
ˎ
WMA files.
USB device
"NO TRACK" is displayed when a USB
device is connected.
ˎ There are no playable MP3/WMA/AAC files on
ˎ
the USB device.
The USB device does not work properly.
ˎ If you connect an incompatible USB device, the
ˎ
following problems may occur.
The USB device is not recognized.
ˎ
File or folder names are not displayed on this
ˎ
unit.
Playback is not possible.
ˎ
The sound skips.
ˎ
There is noise.
ˎ
The sound output is distorted.
ˎ
"OVER CURRENT" appears.
ˎ An abnormal level has been detected in the
ˎ
(USB) port .
electrical current from the
Turn off the unit and remove the USB device
(USB) port . Try using another
from the
USB device. If this message persists, contact
your nearest Sony dealer.
There is no sound.
ˎ The USB device may be connected incorrectly.
ˎ
Turn off the unit and reconnect the USB device.
Then turn on the unit.
There is noise, skipping, or distorted
sound.
ˎ Turn off the unit and reconnect the USB device.
ˎ
Then turn on the unit again.
ˎ The music data itself contains noise, or the
ˎ
sound is distorted. Noise may have entered
during the creation of audio files. Try re-
creating audio files and use them to play on
this unit.
The USB device cannot be connected to
the
(USB) port .
ˎ The connector on the USB device or the USB
ˎ
cable is being inserted backwards. Insert it to
(USB) port in the correct direction.
the
"READING" is displayed for an extended
time, or it takes a long time before
playback starts.
ˎ The reading process can take a long time in the
ˎ
following cases:
There are many folders or files on the USB
ˎ
device.
The unit
The file structure is complex.
ˎ
The memory is almost full.
ˎ
The internal memory is fragmented.
ˎ
To avoid the above problems, we recommend
that you adhere to the following guidelines:
Keep the total number of folders on a USB
ˎ
device to 100 or less.
Keep the total number of files per folder to
ˎ
Steel cabinet
100 or less.
Optimal performance
Erroneous display
Limited performance
ˎ The data stored on the USB device may be
ˎ
corrupted. Send the music data to the USB
device again.
ˎ This unit can display only uppercase letters (A
ˎ
to Z), numbers (0 to 9) and underscore (_).
Other characters will not be displayed correctly.
The USB device is not recognized.
ˎ Turn off the unit and reconnect the USB device.
ˎ
Then turn on the unit.
ˎ The USB device is not functioning properly.
ˎ
Refer to the USB device operation manual.
Play does not start.
ˎ Turn off the unit and reconnect the USB device.
ˎ
Then turn on the unit.
Play does not start from the first track.
ˎ Set the play mode to Normal Play.
ˎ
MP3/WMA/AAC files cannot be played
back.
ˎ The audio files may have inappropriate file
ˎ
extensions. The file extensions supported by
this unit are as follows:
MP3: file extension ".mp3"
ˎ
WMA: file extension ".wma"
ˎ
AAC: file extension ".m4a"
ˎ
ˎ The audio files may have been created in
ˎ
formats other than MP3/WMA/AAC formats.
ˎ The USB storage device uses a file system
ˎ
other than FAT16 or FAT32.*
ˎ The USB storage device is partitioned. Only
ˎ
MP3/WMA/AAC files in the first partition can
be played.
ˎ Playback is possible up to 9 directory levels.
ˎ
ˎ The number of folders on the device exceeds
ˎ
300 (including the "ROOT" folder).
ˎ The number of files on the device exceeds 999.
ˎ
ˎ The number of files per folder exceeds 999.
ˎ
ˎ The files are encrypted or protected by
ˎ
passwords.
* This unit supports FAT16 and FAT32, but some USB
storage media may not support both file systems.
For details, refer to the operation manual of the
USB storage device or contact the manufacturer.
BLUETOOTH device
There is no sound.
ˎ Make sure that this unit is not too far from the
ˎ
BLUETOOTH device (or smartphone), or that
this unit is not receiving interference from a
wireless LAN, another 2.4 GHz wireless device,
or a microwave oven.
ˎ Check that the BLUETOOTH connection was
ˎ
completed properly between this unit and the
BLUETOOTH device (or smartphone).
ˎ Perform pairing again (see "To pair with a
ˎ
BLUETOOTH device").
ˎ Keep away from metal objects or surfaces.
ˎ
ˎ Make sure that the BLUETOOTH function is
ˎ
activated on the BLUETOOTH device (or
smartphone).
The sound skips or the correspondence
distance is short.
ˎ If other equipment that generates
ˎ
electromagnetic radiation, such as a wireless
LAN, other BLUETOOTH device(s), or a
microwave oven is nearby, move the device
and the unit away from such equipment if
possible.
ˎ Remove any obstacle between this unit and
ˎ
the device or move the device and the unit
away from the obstacle.
ˎ Locate this unit and the device as close to each
ˎ
other as possible.
ˎ Re-position this unit.
ˎ
ˎ Re-position the BLUETOOTH device or
ˎ
smartphone.
A connection cannot be established.
ˎ Perform pairing again (see "To pair with a
ˎ
BLUETOOTH device").
ˎ Check that the BLUETOOTH device is
ˎ
Messages
compatible with this unit. For the latest
information on compatible BLUETOOTH
devices, check the information on the website
CANNOT PLAY: An unplayable disc is in the CD
listed is under "Compatible BLUETOOTH
compartment. (Example: broken disc)
devices."
DEVICE FULL: A USB device does not have
enough capacity to record.
Pairing fails.
FOLDER FULL: The number of folders in a USB
ˎ Bring the BLUETOOTH device closer to the unit.
ˎ
device has reached maximum.
ˎ Delete the model name of this unit from the
ˎ
NO BT: BLUETOOTH connection is not
BLUETOOTH device and perform pairing again
established.
(see "To pair with a BLUETOOTH device").
NO DEV: A USB device is being/has been
ˎ Check that the BLUETOOTH device is
ˎ
compatible with this unit. For the latest
removed.
information on compatible BLUETOOTH
NO DISC: There is no disc in the CD
devices, check the information on the website
compartment.
listed is under "Compatible BLUETOOTH
NO TRACK: The tracks/files on the disc/USB
devices."
device are not playable/recordable.
NOT SUPPORT: An unsupported disc is in the CD
One-touch connection (NFC) is not
compartment, or an unsupported USB device is
possible.
connected.
ˎ Check that the smartphone is compatible with
ˎ
NOT USED: You tried to perform a specific
this unit (see "Compatible smartphones").
operation under prohibited conditions.
ˎ Check that the "NFC Easy Connect" app is
ˎ
PROTECT: Recording on a write-protect USB
displayed on the smartphone.
device was attempted.
ˎ Check that the NFC function of the smartphone
ˎ
TRACK FULL: The number of files in a USB
is set to on.
device has reached maximum.
ˎ Turn on the unit and touch the smartphone on
ˎ
the N-marked part again.
ˎ Keep the smartphone close to the unit until the
ˎ
Specifications
smartphone responds. If you fail, move the
smartphone slightly on the N-marked part
of the unit.
CD player section
ˎ If the smartphone is in a case, remove it.
ˎ
System
ˎ NFC receiving sensitivity depends on the
ˎ
Compact disc digital audio system
device. If you fail to connect with a smartphone
Laser diode properties
by One touch several times, connect to the unit
Emission duration: Continuous
by on-screen operation.
Laser output: Less than 44.6 μW
(This output is the value measurement at a
Radio
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.)
The sound is weak or reception is poor
Number of channels
quality.
2
ˎ Replace all the batteries with new ones.
ˎ
Frequency response
ˎ Move the unit away from any nearby TV.
ˎ
20 Hz - 20,000 Hz +1/–2 dB
ˎ For FM reception, extend the antenna to its full
ˎ
Wow and flutter
length, and reorient it for best FM reception.
Below measurable limit
For AM reception, reorient the unit itself to find
USB section
the best reception.
Supported bit rates
The TV picture is unstable.
MP3 (MPEG 1 Audio Layer-3):
32 kbps - 320 kbps, VBR
ˎ If you are listening to an FM program near a TV
ˎ
WMA:
with an indoor antenna, move the unit away
48 kbps - 192 kbps, VBR
from the TV.
AAC (MPEG 4 AAC-LC):
16 kbps - 320 kbps, VBR
Remote
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
The remote does not function.
32/44.1/48 kHz
WMA:
ˎ Replace both batteries in the remote with new
ˎ
32/44.1/48 kHz
ones.
AAC (MPEG 4 AAC-LC):
ˎ Make sure that you are pointing the remote at
ˎ
32/44.1/48 kHz
the remote sensor on the unit.
ˎ Remove any obstacles in the path of the
ˎ
BLUETOOTH section
remote and the unit.
Communication System
ˎ Make sure the remote sensor is not exposed to
ˎ
BLUETOOTH Specification Version 3.0
strong light such as direct sunlight or
Modulation method
fluorescent lamp light.
FHSS
Output
ˎ Move closer to the unit when using the remote.
ˎ
BLUETOOTH Specification Power Class 2
After trying the suggested remedies, if the
Maximum communication range
Line of sight approx. 10 m*
problem persists, unplug the AC power cord or
1
remove all the batteries. After all the indications
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
on the display disappear, plug in the AC power
Supported BLUETOOTH Profiles*
cord again, or re-insert the batteries. If the
problem persists, consult your nearest Sony
A2DP (Advanced Audio Distribution Profile)
AVRCP*
3
(Audio/Video Remote Control Profile)
dealer.
Supported codec*
4
SBC (Subband Codec)
*
1
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
reception sensitivity, aerial performance, operating
system, application software, etc.
*
BLUETOOTH standard profiles provide the
2
specifications for BLUETOOTH communication
between devices.
*
Some operations may not be available depending
3
on the device.
*
Codec: Audio signal compression and conversion
4
format
Radio section
Frequency range
FM: 87.5 MHz - 108.0 MHz
AM: 531 kHz - 1,602 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Input
AUDIO IN
Stereo mini jack
(USB) port
Type A, maximum current 500 mA, USB 2.0 Full
Speed compatible
General
Speaker
Full range: 10 cm dia., 4.6 Ω, cone type (2)
Woofer: 13 cm dia., 4.6 Ω, cone type (1)
Tweeter: 3.5 cm dia. (2)
Power output
4 W + 4 W (at 4.6 Ω, 10% harmonic distortion)
Woofer:
12 W (at 4.6 Ω, 10% harmonic distortion)
Power requirements
For unit:
Australia and Europe models
230 V AC, 50 Hz (AC power supply)
12 V DC (8 R20 (size D) batteries)
Other countries/regions
220 V - 240 V AC, 50/60 Hz (AC power
supply)
12 V DC (8 R20 (size D) batteries)
For remote control:
3 V DC, 2 R6 (size AA) batteries
Power consumption
AC 15 W
Power consumption (during standby mode)
Less than 0.9 W
Power consumption (during BLUETOOTH standby
function)
Less than 1.8 W
Battery Life*
1
, *
2
CD playback
Approx. 20 hours
USB device playback
Approx. 16 hours (at 100 mA load)
Approx. 8 hours (at 500 mA load)
BLUETOOTH device playback
Approx. 22 hours
FM reception
Approx. 26 hours
*
1
Measured by Sony standards. The actual battery
life may vary depending on the circumstances of
the unit or operating conditions.
*
2
When using Sony alkaline batteries
Dimensions
Approx. 600 mm × 210 mm × 355.5 mm
(W/H/D) (incl. projecting parts)
Mass
Approx. 8.0 kg (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control (1)
Design and specifications are subject to change
without notice.
2