Argo C19672 Instrukcja serwisowa - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pojazd terenowy Argo C19672. Argo C19672 16 stron. Ducting & exhaust

Argo Service Manual

Removing the Muffler (Bigfoot Models)

Remove the four fasteners securing the muffler heat shield and remove the shield.

Disconnect the extension springs between the tailpipe and muffler and pull the

tailpipe from the engine compartment.

Remove the muffler at the engine

Always replace exhaust gaskets when servicing the muffler system.

Attach the muffler at the engine and torque to specifications

Slip the tailpipe, from the engine compartment side, through the exhaust screen hole

and connect at the muffler with 2 extension springs.

Assemble the heat shield to the top of the muffler using the 4 fasteners required.

Spark Arrestors

Cleaning the Spark Arrestor (Only for equipped models)

Models Equipped with Spark Arrestors.

Conquest

Response

Bigfoot

Vanguard2

Vanguard

Conquest 6x6

After operating the engine, do not touch any part of the exhaust system until it has

sufficient time to cool!

Keep a record of the number of hours of engine use. The spark arrester should be

removed, cleaned and inspected every 50 hours of operation.

Ontario Drive & Gear Limited

PH.(519)- 662-2840 FAX (519)- 662-2421

IMPOR

IMPORT T T T T ANT

IMPOR

ANT

IMPOR

ANT

All Models

Models manufactured from R19647

Models manufactured from BF13028

Models manufactured from N13436

Models manufactured from S13434

Models manufactured from C12747

DE-11

Ducting & Exhaust