Cisco ASR 9010 Podręcznik - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt sieciowy Cisco ASR 9010. Cisco ASR 9010 44 stron. Replacing cisco asr 9000 series router components
Drukuj stronę- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing Cisco ASR 9000 Series Router Components
Figure 10: Removing or Installing a Version 1 AC or DC Power Module
Removing a Version 2 or Version 3 AC or DC Power Module
Follow these steps to remove a version 2 or version 3 AC or DC power module from the chassis (see figure
titled Removing or Installing a Version 2 or Version 3 AC or DC Power Module). The Cisco ASR 9904 Router
chassis only has one power tray as shown in the figure titled Removing or Installing a Version 2 AC or DC
Power Module from the Cisco ASR 9904 Router .
Procedure
Step 1
Pull the handle down.
Note
Step 2
Slide the power module out of its bay while supporting it with your other hand.
Figure 11: Removing or Installing a Version 2 or Version 3 AC or DC Power Module
Unscrew the screw that secures the power module using a 7/16 hex socket and torque wrench with
the torque set to 50 in-lb.
Removing a Version 2 or Version 3 AC or DC Power Module
Replacing Cisco ASR 9000 Series Router Components
15