Cisco C7200-I - Input/Output Controller - Control Processor Podręcznik użytkownika
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy Cisco C7200-I - Input/Output Controller - Control Processor. Cisco C7200-I - Input/Output Controller - Control Processor 16 stron. Input/output controllers
Drukuj stronę
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E
Input/Output Controllers
This feature module describes the two new variants of the Cisco 7200 I/O card. The
Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The
Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports.
This document includes the following sections:
•
•
•
•
•
•
•
Feature Overview
The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one
Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation
and an RJ-45 receptacle for 10 Mbps operation.
The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet
ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.
I/O controllers support the following features:
•
•
•
•
•
Feature Overview
Supported Platforms
Supported Standards, MIBs, and RFCs
Configuration Tasks
Monitoring and Maintaining the Cisco 7200-I/O GE+E and Cisco 7200-2FE/E
Configuration Examples
Command Reference
Dual EIA/TIA-232 channels for local console and auxiliary ports
NVRAM for storing the system configuration and environmental monitoring logs
Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS
software image
Flash memory for storing the boot helper image
Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis
12.1(5)T and 12.2(14) S
1