Cisco C9300L-48PF-4X Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt sieciowy Cisco C9300L-48PF-4X. Cisco C9300L-48PF-4X 16 stron.

be returned.

In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to

the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and

order information, and may be required for return shipping.

Meraki C9300 devices have been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC rules. A digital device that is marketed for use in a residential environment notwithstanding use in

commercial, business and industrial environments.

Additional warranty information can be found on:

Support and Additional Information

If issues are encountered with device installation or additional help is required, contact Meraki Support by logging in to

dashboard.meraki.com and opening a case by visiting the Get Help section.

• The equipment is intended for industrial or other commercial activities.

• The equipment is used in areas without exposure to harmful and dangerous production factors, unless otherwise

specified in the operational documentation and/or on the equipment labeling.

• The equipment is not for domestic use. The equipment is intended for operation without the constant presence of

maintenance personnel.

• The equipment is subject to installation and maintenance by specialists with the appropriate qualifications, sufficient

specialized knowledge, and skills.

• Rules and conditions for the sale of equipment are determined by the terms of contracts concluded by Cisco or

authorized Cisco partners with equipment buyers.

• Disposal of a technical device at the end of its service life should be carried out in accordance with the requirements

of all state regulations and laws.

• Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in

accordance with the organization's disposal procedure.

• The equipment should be stored in its original packaging in a room protected from atmospheric precipitation. The

permissible temperature and humidity ranges during storage are specified in the Operation (Installation) Manual.

• Transportation of equipment should be carried out in the original packaging in covered vehicles by any means of

transport. The temperature and humidity during transportation must comply with the permissible established ranges

of temperature and humidity during storage (in the off state) specified in the Operation Manual (Installation).

For additional information on Meraki hardware and for other installation guides, please refer to

documentation.meraki.com.

https://meraki.cisco.com/support#process:warranty