Argo XP5 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Bindownica Argo XP5. Argo XP5 18 stron. Electric binding machine 2 in 1

XP5 2 IN1 ELECTRIC BINDING MACHINE
WARNINGS!
GENERAL
Read this operation manual carefully before using.
Keep the machine away from children.
Keep the machine away from fire and liquid.
Put the machine on a stable and safe place in order to prevent it from falling or caus-
ing any injury to people or the machine itself.
Lift the machine from the bottom, not the cover or a the hadle.
This machine is only designed to use wire and plastic comb rings and covers and
shouldn't be used for any other purpose.
Test the machine with some scrap paper before formally punching and binding,
to make sure whether the position is correct to punch.
Make sure that there are no staples or paper clips in the documents to be bound.
When punching plastic covers, we suggest that the covers should be clipped
between two pieces of paper.
Empty the waste tray regularly.
Unauthorized maintenance is not allowed.
ELRCTRICAL
The binding machine should not be placed near or over a radiator, heat register or
water.
Always turn off and unplug the binding machine prior to moving, cleaning, servicing,
or any other action other than normal operation.
Do not operate the unit with a damaged power supply cord or plug.
Do not operate if the unit has been exposed to rain or water.
This unit is intended for indoor use only.
Do not attempt to serve the unit yourself. Opening and/or removing covers could
expose you to dangerous voltage points and/or other serious risks.
© ARGO S.A.
EN
10
www.argo.pl