Cisco Catalyst 2960-XR Instrukcja obsługi sprzętu - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Sprzęt sieciowy Cisco Catalyst 2960-XR. Cisco Catalyst 2960-XR 20 stron.
Również dla Cisco Catalyst 2960-XR: Podręcznik dla początkujących (25 strony), Instrukcja instalacji sprzętu (34 strony)
Drukuj stronę
7 STACK LED
7
Only on switch models that support PoE.
System LED
RPS LED
IRPS LED
Master LED
Port LEDs and Modes
STACK LED
Console LEDs
Ethernet Management Port LED
System LED
Color
Off
System is not powered on.
Green
System is operating normally.
Blinking green
POST in progress.
Amber
System is receiving power but is not functioning properly.
Blinking amber
System is sleep mode.
Table 3 System LED
RPS LED
The RPS LED is only available on switch models that have an RPS port . This is available
only on the Catalyst 2960-X switches.
Note
RPS is not supported on the Catalyst 2960-X 24PSQ-L switches.
Color
Off
RPS is off or not properly connected.
Green
RPS is connected and can provide back-up power.
Blinking
RPS is connected but is unavailable. It is providing power to
green
another device (redundancy has been allocated to the other device).
Amber
The RPS is in standby mode or in a fault condition. See the RPS
documentation.
Blinking
The power supply in a switch has failed, and the RPS is providing
amber
power to the switch (redundancy has been allocated to this device).
Table 4 RPS LED
14
Port LEDs
8
Only on switch models that support stacking.
System Status
RPS Status