ACU-RITE 13239 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Budzik ACU-RITE 13239. ACU-RITE 13239 12 stron. Atomic projection alarm clock

OPERATION

Using the Clock

Using the Projector

This alarm clock projects the current time and the

indicator (when the alarm

is ON).

To power ON the projector, slide the projector ON/OFF switch to the "ON"

position. To power OFF the projector, slide the projector ON/OFF switch to the

"OFF" position.

During power adapter usage, when the projector ON/OFF switch is in the ON

position, the projector will be ON by default. When operating the clock using

back-up batteries only, please note that the projector will be OFF by default.

Press the SNOOZE•LIGHT button to turn on the projector for 5 seconds

(momentary to conserve battery power).

Rotate the projector to view the projection on a wall or ceiling. Press the

button to rotate the orientation of the projection 180 degrees. Focus the

projector by turning the FOCUS dial, located on the back of the clock. Please

note, some rough surfaces may not display the projection clearly.

DO NOT touch or stare directly into the projector lens.

Turn the Alarm ON/OFF

To turn alarm ON, press the ALARM ON/OFF button. When alarm function is

ON, the

icon will be displayed.

To turn alarm OFF, press the ALARM ON/OFF button. When alarm function is

OFF, the

icon will disappear.

Set the Alarm Time

Press and release the ALARM ADJUST button to enter ALARM SET mode.

To adjust the currently selected (flashing) item, press and release the "

" or

" buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the ALARM ADJUST button to

adjust the next preference. The preference set order is as follows:

ALARM CLOCK HOUR

ALARM CLOCK MINUTE

VOLUME

You will automatically exit ALARM SET MODE if no buttons are pressed for

5 seconds. Enter ALARM SET MODE at any time by pressing the ALARM

ADJUST button.