Digitone ProSeries 3 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria telefoniczne Digitone ProSeries 3. Digitone ProSeries 3 16 stron.

Drukuj stronę

Inviting Area Codes

Code 50

You can program in specific Invited area codes using the Program Button on the front

panel. To enable this feature, press and hold the Program Button for 3 seconds until

you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 50 to store an area code followed by the # key 7 times, then the * key.

The # key is used as a wildcard replacement for any number. Example for Invited area

codes enter: 50, 894 ### #### *, display shows function.

Inviting Callers within a Blocked Area Code

Code 52

Invited callers within a blocked area code can only be added using programming Code

52, and not by using the Invite button. To Invite a number within a blocked area code,

press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter 52 to store a full 10

digit number followed by the * key. Example: 52, 894 555 1212 *, display shows

function. Store up to 50 numbers within one or more area codes.

Inviting VIP Callers

Code 60

You can program in specific VIP callers like family, friends and business associates, who

can ring through at any time by using the Program Button on the front panel. To

enable this feature, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays

enter 60 to store a full number followed by the * key.

Example for a VIP number

enter: 60, 894 555 1212 * or for a VIP area code enter: 60, 894 ### #### *, display

shows function. Store up to 80 numbers or area codes.

Features Guidance

First Ring Suppression™

Code 70

– Set ON to prevent blocked calls from ringing

connected phones in the TEL port. Caller ID is repeated to the TEL port when valid or

Invited calls are passed through. Note: Extension phones connected directly to the

phone service will ring once on blocked calls.

Digitone recommends using a

Cordless phone system with multiple handsets connected to the TEL port to

distribute ringing throughout your home where you may have older wired corded

phones permanently connected. You would then turn off the corded phone ringers so

that the cordless system could do the ring announcements. If you want to hear the

first ring, when "Enter Code" displays enter 71. This code will allow all rings and all

Caller ID information to be received by phones connected to the TEL phone port.

Default Call Filters

Out of Area, Private and X "Unknown" are OPX

Code 72

If you want to have an answer machine or your voice mail to take these types of calls

and not ring your phone connected to the DPS3 you can program in Code 72 (OPX

override). Note that Code 72 allows the OPX calls through to the Line only, not the TEL

phone port. To enable OPX Override, enter programming: press and hold the Program

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays enter 72, display shows function. If you want to

restore Blocking of OPX calls later, enter programming: press and hold the Program