Cisco CSC-C2FCIT Instalacja i aktualizacja - Strona 3

Przeglądaj online lub pobierz pdf Instalacja i aktualizacja dla Sprzęt sieciowy Cisco CSC-C2FCIT. Cisco CSC-C2FCIT 32 stron. Fddi card and appliques

Figure 1
FDDI Connections
The distance limitations for single-mode and multimode FDDI stations are listed in Table 1. Both
FDDI modes provide 11 decibels (dB) of optical power.
Table 1
Transceiver
Type
Single-mode
Multimode
FDDI Appliques
The fiber-optic transceivers reside on circuit cards called appliques that provide the interface
between external network connections and the internal CSC-FCI card. The four applique
configurations are shown in Figures 2 through 5; each provides a unique combination of single-mode
and/or multimode FDDI interfaces.
Following are the four FDDI applique mode combinations:
PHY-A multimode, PHY-B multimode (APP-LMM), Figure 2
PHY-A multimode, PHY-B single mode (APP-LMS), Figure 3
PHY-A single mode, PHY-B multimode (APP-LSM), Figure 4
PHY-A single mode, PHY-B single mode (APP-LSS), Figure 5
Both the single-mode and multimode transceivers provide a Class A dual attachment interface that
can be connected to either a Class A or Class B station. Class A is a dual attachment station (DAS)
with primary and secondary rings; Class B is a single attachment station (SAS) with only a primary
ring.
CSC-C2FCIT (FDDI) Card—Component-Side View
FDDI A, E, I, M
FDDI B, F, J, N FDDI C, G, K, O
FDDI Maximum Transmission Distances
Maximum Distance Between
Stations
Up to 6.2 mi (10 km)
Up to 1.2 mi (2 km)
Installing and Upgrading the CSC-C2FCIT FDDI Card and Appliques
Serial
PROM
U34
FDDI D, H, L, P
FDDI Module Overview
Microcode
EPROM
U32
3