Cisco CWDM-GBIC-1610 Uwagi dotyczące instalacji - Strona 23
Przeglądaj online lub pobierz pdf Uwagi dotyczące instalacji dla Sprzęt sieciowy Cisco CWDM-GBIC-1610. Cisco CWDM-GBIC-1610 36 stron. Passive optical system
Również dla Cisco CWDM-GBIC-1610: Podręcznik instalacji i specyfikacji (24 strony)
Drukuj stronę
Connecting Cables to the CWDM 8-Channel Multiplexer/Demultiplexer Module
Make sure that the CWDM GBIC transceiver color code or CWDM SFP transceiver color code matches
Note
the color code of the OADM port to which it is connected.
To connect cables to a CWDM 8-channel multiplexer/demultiplexer module, follow these steps (see
Figure
Insert the CWDM GBIC or CWDM SFP transceivers into the appropriate modules on your switch or
Step 1
router system if you have not already done so. For more information on installing CWDM GBIC
transceivers and SFP transceivers, refer to the Cisco CWDM GBIC and CWDM SFP Installation Note.
Note
Note
Warning
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Statement 1056
78-16565-02
19):
Clean all fiber-optic plugs on the cables before inserting the plugs into the fiber-optic
connectors.
Always use single-mode fiber-optic patch cables to connect the 8-channel
multiplexer/demultiplexer ports to the CWDM GBIC transceivers and CWDM SFP transceivers.
Connecting the CWDM Passive Optical System to Your System
Cisco CWDM Passive Optical System Installation Note
23