Cisco Firepower 2110 Instrukcja oprogramowania - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja oprogramowania dla Sprzęt sieciowy Cisco Firepower 2110. Cisco Firepower 2110 37 stron. Rack-mount and ground the chassis
Również dla Cisco Firepower 2110: Podręcznik (12 strony), Podręcznik wdrażania (8 strony), Pierwsze kroki (42 strony)

Drukuj stronę

Cisco Firepower 2110 Instrukcja oprogramowania

Cisco ASA and Firepower Threat Defense Reimage Guide

sync

tftpdnld

The ASA image downloads and boots up to the CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 2 > interface gigabitethernet0/0

rommon 3 > address 10.86.118.4

rommon 4 > netmask 255.255.255.0

rommon 5 > server 10.86.118.21

rommon 6 > gateway 10.86.118.1

rommon 7 > file asalatest-smp-k8.bin

rommon 8 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=asalatest-smp-k8.bin

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 9 > sync

Updating NVRAM Parameters...

rommon 10 > tftpdnld

Example for the ASA 5506-X:

rommon 2 > address 10.86.118.4

rommon 3 > netmask 255.255.255.0

rommon 4 > server 10.86.118.21

rommon 5 > gateway 10.86.118.21

rommon 6 > file asalatest-lfbff-k8.SPA

rommon 7 > set