Cisco Gigabit Switch Router Cisco 12012 Instrukcja wymiany - Strona 25
Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Sprzęt sieciowy Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 34 stron. Gigabit switch router cablemanagement
kit
Również dla Cisco Gigabit Switch Router Cisco 12012: Instrukcja wymiany (6 strony), Arkusz danych (9 strony), Instrukcja wymiany (20 strony), Instrukcja instalacji (14 strony)
Drukuj stronę
Grasp the two line card ejector levers and pivot them away from the card until they are
Step 4
perpendicular to the line card faceplate to completely seat the card in the backplane
connector.
Tighten the two captive screws at the top and bottom of the line card.
Step 5
Repeat Step 2 through Step 5 for the rest of the line cards.
Proceeding from left to right in the upper card cage, check your list of interface cable
Step 6
connections and identify the interface cables that attach to the first line card.
One interface cable at a time, carefully route the identified interface cable through the
Step 7
horizontal cable tray and down to the line card interface port.
On line cards with multiple ports, route and connect the interface cables to the line
Note
cards starting at the bottom port and working up.
Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Removing and Replacing a Card Cage Assembly
25