Cisco IAD2430 Series Skrócona instrukcja obsługi - Strona 32
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco IAD2430 Series. Cisco IAD2430 Series 34 stron. Integrated access device
Również dla Cisco IAD2430 Series: Podręcznik przeglądowy (13 strony), Przegląd (16 strony)
Drukuj stronę
To configure basic T1/E1 controller settings to support PPP, High-Level Data Link Control (HDLC), or Frame Relay (FR),
follow these steps, beginning in global configuration mode:
Command
Step 1
Router(config)# controller t1/e1 1/0
Step 2
Router(config-ctrl)# clock source {internal | line |
loop-timed}
Step 3
Router(config-ctrl)# description line
Step 4
Router(config-ctrl)# cablelength short {133 | 266 |
399 | 533 | 655}
or
Router(config-ctrl)# cablelength long {gain26 | gain36}
{-15db | -22.5db | -7.5db | 0db}
Step 5
Router(config-ctrl)# framing {sf | esf}
Step 6
Router(config-ctrl)# linecode {ami | b8zs}
Step 7
Router(config-ctrl)# no shutdown
Step 8
Router(config-ctrl)# exit
Step 9
Router(config)# exit
Step 10
Router# show controller t1/e1 1/0
Configuring Digital Voice
To configure basic T1/E1 controller settings to support PPP, HDLC, or FR, follow these steps, beginning in global configuration
mode:
Command
Step 1
Router(config)# controller t1/e1 1/0
Step 2
Router(config-ctrl)# mode cas
Step 3
Router(config-ctrl)# framing esf
Step 4
Router(config-ctrl)# linecode b8zs
Step 5
Router(config-ctrl)# framing {sf | esf}
Step 6
Router(config-ctrl)# ds0-group 1 timeslots
1-24 type e&m-immediate-start
32
Description
Enters controller configuration mode by controller
number.
Configures the controller clock source for a DS1
link.
If the clock source is a network device attached to the
T1/E1 port that you are configuring now, select the
line option. For any other clock source (either
internal or a network device attached to any other
port), select the internal option.
The IAD2435 IAD supports only two clock
Note
source options: internal clock source and
line clock source.
Enters a description of the controller, such as the
destination or its application. The description can be
as many as 80 characters long.
Configures the cable length if the length is
655 ft (200 m) or shorter.
or
Configures the receive gain and transmit attenuation
if the cable length is longer than 655 ft (200 m).
If necessary, changes the DS1 link framing format.
The default is SuperFrame (sf).
If necessary, changes the line encoding format for the
DS1 link. The default is ami.
Activates the T1/E1 controller.
Exits controller configuration mode.
Exits configuration mode.
Verifies the controller configuration.
Description
Enters controller configuration mode by controller number.
Configures channel-associated signaling.
Configures framing.
Configures line encoding format.
If necessary, changes the DS1 link framing format. The default
is SuperFrame (sf).
Configures the DS0 group.