Digitrax DN143IP Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Digitrax DN143IP. Digitrax DN143IP 8 stron. Complete train control

Drukuj stronę

Digitrax LocoMotion

Your locomotives look like the real thing, now you can make them run like the

real thing, too. Digitrax decoders incorporate torque compensation for smooth

as silk operation. You can also program CVs that control momentum, 3 step

and 128 step speed tables, switching speed, normal direction of travel,

scaleable speed stabilization and more to take full advantage of the Digitrax

LocoMotion™ System.

Momentum-CV03 & CV04

Momentum is part of the LocoMotion

CV03 and deceleration by CV04. Both come from the factory set to 000. A

range of 000 to 031 is available for both accel and decel. We recommend that

you try CV03:003 and CV04:000 as a starting point for experimenting with

momentum.

Speed Tables-How the Loco Responds to the Throttle

With Digitrax LocoMotion

and High Resolution 28 Step Tables. Please see your Digitrax Decoder Manual

for a discussion of the 28 Step Tables. The 3 Step Tables are set up by program-

ming 3 CVs: Start Voltage (CV02), Mid point Voltage (CV06) and Max Voltage

(CV05). These values are set at 000 at the factory. All have a range of values

from 000 to 255. We recommend the following CV values as a starting point for

experimenting with speed tables.

Loco Type

Switcher

Concentrated low speed. Limited top

speed

Road Switcher

Prototypical top speed w/evenly

distributed curve from 0 to top speed

Mainline Loco

Quick increase to cruising speed then

levels off to prototypical top speed.

Complete Train Control

Run Your Trains, Not Your Track!

System

, there are two types of speed tables: 3 Step Tables

www.digitrax.com

System. Acceleration is controlled by

V Start

CV02

002

V Mid

V Max

CV06

CV05

038

064

048

098

128

154