Digitrax DN166I2 Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Digitrax DN166I2. Digitrax DN166I2 8 stron. Complete train control

Function Outputs on the DN166I2

The DN166I2 is set up at the factory to control six functions. The unit has two

sets of outputs for directional lighting. Pads F0F/F0F+ are for the front light and

F0R/F0R+ for the rear light. Functions F1 , F2 , F3 and F4 can be used by sol-

dering a wire from the pad for the function you wish to use to the lamp (or other

function) you wish to control.

All six function outputs can be easily set up with Digitrax FX3 lighting effects

or as standard on/off functions with the following operational qualifiers:

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

F2+

F0F

F0F+

F4+

Function Remapping

Function remapping allows you to program the function outputs of your decoder

to be controlled by selected function keys on your throttle. Please consult the

Digitrax Decoder Manual or website for information on function remapping.

F1+

F3+

— 6 —

www.digitrax.com

F0R

F0R+