Digitrax DT400 Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler Digitrax DT400. Digitrax DT400 9 stron.

DT402D

When a 9 volt battery is inserted in a

DT402D throttle, the following three

splash screens are displayed in

sequence.

The first splash screen displays the

firmware ID and version.

The second splash screen displays

the Duplex Group Name and Duplex

Channel ID. The group name for our

N-Trak layout is currently set to

OKNRail and the channel is 26.

The third splash screen displays the

battery voltage and Duplex Channel

ID. A DT402D throttle needs at least

8.0V to operate reliably

A DT402D has a duplex (two way) radio capability. If the throttle displays the correct Duplex Group

Name and Duplex Channel ID, all throttle functions can be performed with out being plugged into the

LocoNet, and the throttle should not be plugged into the LocoNet. If the throttle does not display the

correct Duplex Group Name and Duplex Channel ID, briefly plug the throttle into the LocoNet to set

the group name and channel.