Digitrax SDH164K1C Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Digitrax SDH164K1C. Digitrax SDH164K1C 12 stron. Plug ‘n play for kato f40ph ho

Drukuj stronę

Capacitor with

Clip Installed

Customizing Your Decoder

Your Digitrax decoder is ready to run and will operate using address 03 with no

additional programming. On your Digitrax system, simply select the locomo-

tive's address and the sound will start. On some DCC systems, it is necessary

to select the locomotive address AND send a command to start the sound.

For a more prototypical railroading experience, your decoder can be cus-

tomized for your specific locomotive by programming some of the

Configuration Variables, or CVs, available. Digitrax SD decoders can be pro-

grammed using either the direct method on a programming track or with the

operations mode using the main line. See the Digitrax Decoder Manual or the

Digitrax web site for more information.

Initial Test and Programming: This decoder is preprogrammed and tested

with an F40PH sound scheme, and is ready to operate on factory default

address 03. Before customizing the decoder it is useful to run it on the fac-

tory default address 03 to check the installation. The following sections

show how to change the locomotive address and customize the decoder

For more information on decoder installation and programming techniques and

examples visit the www.digitrax.com

Changing the Decoder Address

The first CV most people change is the decoder address. This allows you to

independently control each loco with a unique address. Digitrax decoders are

omplete

rain

Run Your Trains, Not Your Track!

www.digitrax.com

ontrol

Figure 4: Installation Diagram

Track Power Clips