argon audio Stream 3 MK2 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Radio argon audio Stream 3 MK2. argon audio Stream 3 MK2 16 stron.

4.2 Streaming audio quality

•

Low quality

•

Normal quality

•

High quality

Select the required level of audio quality for the available streaming services. The actual bit rate for each

level depends on the service being used. The currently set quality level is indicated with an asterisk.

Stream 3 MK2 remembers the last four wireless networks it has connected to, and automatically tries to

connect to whichever one of them it can find.

You can see the list of registered networks through Menu > System settings > Network >

Network profile >. From here you can delete unwanted networks by turning and pressing Select then

confirming delete Yes.

There are also other options for viewing and manually altering network settings from Menu > System

settings > Network. Users experienced with networking may find these options useful for diagnosing and

fixing network problems.

The default language is English. To change, select Menu > System settings > Language > then select your

preferred language. Please restart the radio after changing languages.

A factory reset resets all user settings to default values, so time/date, network configuration and presets are

lost. However, the radio's current software version is maintained.

To perform a factory reset, select Menu > System settings >Factory reset Proceed > Yes.

From time to time, Argon Audio may make software upgrades available with bug fixes and/or additional

features. You can either check manually, or set Stream 3 MK2 to check periodically automatically (this is the

default). If Stream 3 MK2 detects that newer software is available, it asks if you want to go ahead with an

update. If you agree, the new software is then downloaded and installed. After a software upgrade, all user

settings are maintained.

CAUTION: Before starting a software upgrade, ensure that Stream 3 MK2 is plugged into a stable mains

power connection. Disconnecting power during a software update may permanently damage the unit.

To turn automatic checking on or off, select Auto-check setting.

This allows you to run the Setup wizard at any time. The wizard guides you through the essential settings

in the following order:

1. Date/Time – Set format

2. Auto update – select clock update source or No Update

3. Set Time/Date (this step is only needed if the 'No Update' option is selected in Auto update)

4. Network wizard automatically runs

Once you are connected to a network the wizard is completed.

w w w . a r g o n a u d i o . c o m

S t r e a m 3 M K 2