argon audio TT - 3 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Gramofon argon audio TT - 3. argon audio TT - 3 8 stron.

Amplifier connection

There is a RCA output on the rear panel of the turntable. Connect

the RCA plug to this output, and then to the PHONO INPUT of your

amplifier. Red plug into R channel input, White plug into L channel

input. If your amplifier does not have an input suitable for phono

cartridges, you will require a separate phono amplifier stage for MM

or MC cartridges such as the Argon Audio PHONO1, which can

then be connected between the record player and a free line level

input of the amplifier. The ground wire of the tonearm lead should

be connected to the earth terminal on your amplifier (if provided).

Place the record on the turntable. If it is a 45 rpm, you need to

place the adaptor on the record spindle.

Switch on the power.

Pull up the arm lifter, and then release the arm lock clip.

Place the cartridge vertically over the first track of the record.

Rotate the RPM knob to the speed you want to play, which will

cause the platter to start turning.

Lower the arm lifter. The stylus will touch the record and start

playing music.

When the record is done, lift the tone arm up, lead it back to the

arm rest and lock it.

To pause the playing, lift the tone arm by pull up the arm lifter,

and then turn the speed knob to "OFF".

T T - 3 M a n u a l