Digitroll DMS 06 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy kontroli Digitroll DMS 06. Digitroll DMS 06 12 stron. Planter monitor

TURNING THE SYSTEM ON

Press the

button. Upon turning the device on, a system test is performed.

Then the device is ready to monitor the interruptions in the seeding process.

This test is performed:

•

every time the monitor is turned on,

•

upon pressing the

TEST function is to be used only if seeding is not in progress!

During the test process, the monitor detects the number and status of seed

sensors (operability, dust level check).

Once the test is completed, "found" modules are displayed:

•

properly working photosensors: continuous red light,

•

sensors require cleaning: flashing light and intermittent sound.

The unit simultaneously monitors the seed flow in each row. If seed flow is

continuous, the LED is off. In case flow is interrupted e.g. because of

blockage, incorrectly set seed sweeper, low vacuum, etc. for longer than the

previously set shortfall tolerance time value, an audible alarm is given and the

LED related to the given row turns on.

The length of audible alarm correlates to the duration of shortfall. The audible

alarm is automatically skipped when the power machine is turning.

SEED SHORTFALL THRESHOLD FOR ERROR

INDICATION

On the monitor front the scale above the LEDs indicate the seed shortfall

tolerance time related to the LEDs.

By keeping the

The time value above the LED lighting when the button is released will be the

selected threshold value.

Checking the selected value: press the

above the selected value.

Selectable time intervals: 0.25, 0.5, 0.75, 1, 1.5 and 2 seconds.

button.

button pressed, the red light "circulates" on the display.

TURNING THE SYSTEM ON

button once. The red light flashes