Digitroll DMS 08 LCD Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Systemy kontroli Digitroll DMS 08 LCD. Digitroll DMS 08 LCD 16 stron. Seeding control system

Drukuj stronę

LANGUAGE SELECTION

The program enables the selection of one language out of the 5 followings: Hungarian,

Slovakian, Ukrainian, English, German.

TROUBLESHOOTING

THE MONITOR DOES NOT FUNCTIONING, NO LIGHTS ON

DISPLAY

• The monitor does not receive 12 VCD power supply (min. 8,5V)

• Wrong polarity battery lead connection

• Missed to switch ON button on the back side of monitor

Defected main switch or electronic part

•

There is an auto-reset fuse built in the monitor, so it is unnecessary to dismount monitor

to replace fuse. Let official service repair it.

THE MONITOR WORKS BUT "POWER OUT" LED DOES NOT

LIGHTS OR IT BLINKS

This LED indicates power supply and get off when overloaded.

Signs:

Probe: Disconnect modules from monitor:

•

If LED lights (after a short pause) - external short circuit

•

If LED remains dark - the monitor is defect

Possible reasons of external short circuit:

•

Cable pinch-in :

Troubleshooting: systematically disconnect modules started from

monitor side. If LED lights, connect again (no problem with cable

until this point) and disconnect next connector until you find short

circuit area.

Defected seed module:

Troubleshooting: by doing the same disconnection process you can find the

defected unit that caused short circuit. The presence of power supply in seed

modules is also indicated by built-in LEDs.

English

LED lights

LED blinks

LED off

normal function

partial overload

total external short circuit

TROUBLESHOOTING