Epson 1000XL Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner Epson 1000XL. Epson 1000XL 9 stron.

4. Steps to scan slides and negatives

Step

Set up the scanner for use (see Steps to set up

the scanner for use above)



Remove the document mat from the

transparency unit if it is in place.



Instructions for inserting and removing

the document mat are illustrated on the

transparency unit.



Check that the transparency guide is

installed

Load you slides or negatives face down into the appropriate film holder.

TIPS



The default orientation for Up is to the left



If your slides have a dot in the corner used as an aid for placing slides into a

carousel, turn the slide so that the dot is facing down and is in the top right

corner.



If you are using two film holders at once, the last column won't be scanned

and should be left empty.

Place the film holder(s) onto the scanner ensuring

that the holders do not cover the glass to the left of

the notch on the transparency guide. This area is

left clear to calibrate the scanner prior to scanning.

Check the Thumbnail box below the preview button and then performa a preview

scan. This should give you a set of spearate thumbnail images corresponding to each

slide/negative.

If there are problems with cropping (usually with very dark/bright images) you may

have to uncheck the Thumbnail box and repeat the preview. In this case you will have

to marquee select each individual image (or just the image that has a problem)

User Guide for Epson1000XL Scanner

Action

Page 5