Epson 1250 - Perfection Photo Flatbed Scanner Podręcznik podstawowy - Strona 23

Scanning Transparencies

This section gives basic information on using the transparency unit (TPU) for your

scanner. The transparency unit, also referred to as a film adapter, lets you scan slides

and negative or positive film strips with your scanner.

If you don't have the PHOTO version of your scanner, you can purchase a

transparency unit from the EPSON Store

www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for

dealer referral.

Use the following part numbers when ordering your TPU:

EPSON Perfection 1250 TPU: B12B813321

EPSON Perfection 1650 TPU: B813172

The EPSON Perfection 1650 PHOTO TPU is built into the scanner lid. The

optional TPU for the EPSON Perfection 1650 is a separate piece; it is not

built into the lid. For instructions on using this TPU, see your electronic

Reference Guide.

Be sure to use the film holders that came with your scanner. They ensure correct

placement of your transparencies and make it easier to scan them.

Film has two sides, a shiny base side and a dull emulsion side. The base side of the

film has the film maker's name and film ID numbers printed on it. Always place the

shiny base side down.

Hold the film by the edges or use gloves. Touching the film surface with

bare hands can leave fingerprints or other marks on the film.

at (800) 873-7766 or visit our web site at

Scanning Transparencies