Epson 1640XL - Expression Graphic Arts Podręcznik użytkownika - Strona 16

9. Peel the backing from the stopper

and from the paper eject support

provided with the ADF. Then

attach the stopper and paper eject

support to the scanner as shown.

Insert the tabs on the paper eject

support into the slots at the right

end of the document table.

There are two stoppers included with the ADF, a light gray one and a

dark gray one. Use the light gray stopper, not the dark gray stopper.

10. Close the ADF.

If you haven't connected the scanner to your computer, see the Start Here sheet for

instructions.

Loading Paper in the Automatic Document Feeder

The ADF can hold up to 100 sheets of the following paper sizes, based on a paper

weight of 17 pounds (64 g/m

Paper size

A3, Ledger, B4, Legal, A4, Letter, B5, A5, 5.5 × 5.8-inch (140 × 148 mm)

A4, Letter, B5, A5

Before loading the ADF, make sure the document:

Has no wet ink on it.

■

Has no holes or no cut-out areas.

■

Is not ripped or wrinkled.

■

Has no staples or other objects attached that may damage the feeder.

■

Has no folds.

■

Is not a multipart form.

■

Stopper

) and a thickness of 0.2 inch (6.0 mm) or less:

Paper eject

support

Direction

Portrait

Landscape