Cisco TelePresence Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt sieciowy Cisco TelePresence. Cisco TelePresence 24 stron. Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server
Również dla Cisco TelePresence: Broszura (4 strony), Specyfikacje (7 strony), Instrukcja instalacji (4 strony), Podręcznik administratora (27 strony), Skrócona instrukcja obsługi (2 strony), Arkusz instalacyjny (2 strony)

Drukuj stronę

CUCM Integration with Content Server 6.2

Field

Destination Address

Destination Port

SIP Trunk Security

Profile

Rerouting Calling Search

Space

Out-of-Dialog Refer

Calling Search Space

SIP Profile

Step 8

Click Save.

SIP Trunk created successfully.

Step 9

Click Reset.

SIP Route pattern Configuration Setting:

There are two way to configure call Routing for a SIP Trunk:

Using Route pattern (For IP Address/ Domain based Routing).

•

Recording Alias URI Suffix on TCS should match with suffix based SIP route pattern that

configured on CUCM.

Eg: If SIP route pattern configured on CUCM is '@tcs-cisco.com' then the recording alias URI

configured on TCS must be '[email protected]'.

Using Number Based Routing.

•

Recording Alias URI Suffix on TCS should match with IP or FQDN configured on CUCM SIP trunk

created for TCS.

Eg: If number based route pattern configured on CUCM is 555X, then the recording alias URI configured

on TCS must be '555X@<IP' or 'FQDN configured on CUCM Sip Trunk for TCS>'.

In Cisco Unified Communications Manager Administration, use the Call Routing > SIP Route Pattern

menu path to configure SIP route patterns.

CUCM uses SIP route patterns to route or block both internal and external calls.

The domain name or IP address provides the basis for routing. The administrator can add domains, IP

addresses, and IP network (subnet) addresses and associate them to SIP trunks (only). This method

allows requests that are destined for these domains to be routed through particular SIP trunk

interfaces.

Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide

3-20

Chapter 3

Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence

Setting

Enter the IP address of the Cisco TCS to which CUCM will connect.

We recommend that you accept the default of 5060.

Select the name of the SIP trunk security profile that you created in the

"Create the SIP Trunk Security Profile" procedure on page

example, click "Cisco TCS SIP Trunk Security Profile."

Select the name of the calling search space that is used by user phones.

Select the name of the SIP profile that you created in the

SIP Profile" procedure on page

SIP Profile."

"To Create the

3-17. For example, select "Cisco TCS 6.2

3-15. For