Cisco TelePresence Server 7010 Instrukcja wymiany - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Sprzęt sieciowy Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 18 stron. 600w ac-input power supply and fan tray replacement
Również dla Cisco TelePresence Server 7010: Instrukcja wymiany (23 strony), Instrukcja instalacji (15 strony), Instrukcja instalacji (14 strony), Pierwsze kroki (16 strony)
Drukuj stronę
Figure 6
Replacing the Fan Tray
Removing/replacing
fan tray
Step 6
Insert the top runner of the fan tray through the notch in the top of the chassis. Continue
pushing the tray into the chassis, and ensure that the bottom runner slides into the track on
the floor of the chassis. If the tray hangs up, pull it back out a few inches and try pushing it
in again. If the runners seem to be catching on the brackets, push the tray slightly toward
the left when inserting it again.
Slide the tray back into the chassis until the circuit board snaps into the backplane socket.
Step 7
Replace the M4 screw in the tab and tighten it with a number 2 Phillips screwdriver.
Step 8
600W AC-Input Power Supply and Fan Tray Replacement Instructions
Replacing Components
11