Cisco UBR7246VXR Instalacja sprzętu - Strona 13

Przeglądaj online lub pobierz pdf Instalacja sprzętu dla Sprzęt sieciowy Cisco UBR7246VXR. Cisco UBR7246VXR 25 stron. Universal broadband router
Również dla Cisco UBR7246VXR: Skrócona instrukcja obsługi (27 strony), Podręcznik użytkownika (7 strony), Instrukcja instalacji (28 strony)

Installing the Chassis on a Workbench or Tabletop

Complete the following steps to install the Cisco uBR7246VXR router on a workbench or tabletop:

Step 1

Remove any debris and dust from the tabletop or workbench, and the surrounding area.

Step 2

On the chassis, ensure that all captive screws on the network processing engine, the I/O controller, the line cards, the

clock card, and each power supply are tightened and the port adapter retention clip is in the locked position.

Step 3

Place the Cisco uBR7246VXR router on the tabletop or workbench.

Step 4

Ensure that there is the appropriate amount of space around the router.

Before connecting power and turning on the router, you must provide an adequate ground connection for your system. Two M5

ground receptacles provide a chassis ground connection for electrostatic discharge (ESD). The receptacles are located adjacent

to the lower power supply bay on the Cisco uBR7246VXR router chassis. See Figure 9.

Figure 9

Chassis Ground Location

Caution

The Cisco uBR7246VXR router installation must comply with all applicable codes and is approved for use with

copper conductors only. The ground bond fastening hardware should be of compatible material and preclude

loosening, deterioration, and electrochemical corrosion of hardware and joined material. Attachment of the chassis

ground to a headend, hub, or other interior ground system should be made with a 6-AWG, copper ground

conductor at a minimum.

Warning

Use copper connectors only. Statement 1025

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of

a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if

you are uncertain that suitable grounding is available. Statement 1024

Chassis

ground

location