Cisco UCS B200 M3 Uwaga dotycząca instalacji i obsługi - Strona 10

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Sprzęt sieciowy Cisco UCS B200 M3. Cisco UCS B200 M3 36 stron. Blade server
Również dla Cisco UCS B200 M3: Instrukcja instalacji (34 strony), Uwaga dotycząca instalacji i obsługi (37 strony), Podręcznik (8 strony), Instrukcja aktualizacji (21 strony), Uwaga dotycząca instalacji i obsługi (28 strony)

Installing and Removing a Blade Server Hard Drive

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

RAID volumes. If drives of different capacities are used, the useable portion of the smallest drive will

be used on all drives that make up the RAID volume. Before upgrading or adding an HDD to a running

system, check the service profile in UCS Manager to make sure that the new hardware configuration is

within the parameters allowed by the service profile.

Hard disk and RAID troubleshooting information is in the "Troubleshooting Server Hardware" chapter

of the

B200 M3 servers if needed.

Table 2

drive sled attached. Spare drive sleds are not available.

Table 2

Product ID

HDDs

A03-D1TBSATA

UCS-HDD900GI2F106

A03-D600GA2

A03-D500GC3

UCS-HDD300GI2F105

A03-D300GA2

A03-D146GC2

SSDs

UCS-SD300G0KA2-E

UCS-SD200G0KA2-E

UCS-SD100G0KA2-E

Removing a Blade Server Hard Drive

To remove a hard drive from a blade server, follow these steps:

Step 1

Push the button to release the ejector, and then pull the hard drive from its slot.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Cisco UCS Troubleshooting

shows the drives supported in this blade server. They are all hot pluggable and come with the

Supported Drives

Description

1 TB 6 Gb SATA 7.2K RPM SFF HDD

900GB 6Gb SAS 10K RPM SFF HDD

600 GB 6 Gb SAS transfer rate, 10K RPM SFF HDD

500GB 6Gb SATA 7.2K RPM SFF HDD

300 GB 6 Gb SAS transfer rate, 15K RPM SFF HDD

300 GB 6Gb SAS 10K RPM SFF HDD

146 GB 6 Gb SAS transfer rate, 15K RPM SFF HDD

300GB Std Height 15mm SATA SSD

200 GB Std Height 15 mm SATA SSD

100 GB Std Height 15 mm SATA SSD

Guide. This provides a procedure for moving a RAID array between

OL-26624-01