Cisco UCS B200 M3 Uwaga dotycząca instalacji i obsługi - Strona 8

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Sprzęt sieciowy Cisco UCS B200 M3. Cisco UCS B200 M3 28 stron. Blade server
Również dla Cisco UCS B200 M3: Instrukcja instalacji (34 strony), Uwaga dotycząca instalacji i obsługi (36 strony), Uwaga dotycząca instalacji i obsługi (37 strony), Podręcznik (8 strony), Instrukcja aktualizacji (21 strony)

Figure 5: Positioning a Blade Server in the Chassis

Step 2

Open the ejector levers in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector so that it catches the edge of the chassis and presses the blade server all the way in.

Step 5

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening only with bare fingers is unlikely

to lead to stripped or damaged captive screws.

Cisco UCS Manager automatically reacknowledges, reassociates, and recommissions the server, provided any hardware

changes are allowed by the service profile.

Secure Digital Cards

Secure Digital (SD) card slots are provided and one or two SD cards can be populated. If two SD cards are populated, they can be

used in a mirrored mode.

Note

Do not mix different capacity cards in the same server.

Note

Due to technical limitations, if the server is running a Cisco UCS Manager version earlier than release 2.2(3a) with the 32-GB

SD card, only 16-GB usable capacity is available (regardless of mirroring) in the server.