Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) Instrukcja instalacji i konfiguracji

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Sprzęt sieciowy Cisco Versatile Interface Processor (VIP6-80) (VIP6-80). Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) 40 stron. Versatile interface processor

Drukuj stronę
Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) Instrukcja instalacji i konfiguracji
Versatile Interface Processor (VIP6-80)
Installation and Configuration Guide
Product Numbers: VIP6-80(=), MEM-VIP6-64M-SD(=), MEM-VIP6-128M-SD(=), MEM-VIP6-256M-SD(=)
Customer Order Number DOC-7814372=
Introduction
This document describes the Versatile Interface Processor (VIP6-80), an option available for use with
the Cisco 7500 series and the Cisco 7000 series routers using the 7000 Series Route Switch Processor
(RSP7000) and 7000 Series Chassis Interface (RSP7000CI). The VIP6-80 improves high-performance
switching over previous generation VIPs.
The VIP6-80 supports online insertion and removal (OIR), a feature that allows you to remove and
replace a VIP6-80 without first shutting down the system. However, the VIP6-80 does not support OIR
of port adapters (PAs). The VIP6-80 must be removed before removing or installing the port adapter.
The VIP6-80 also supports Single Line Card Reload, a feature that reloads a failed line card on the
network backplane without reloading other line cards. Refer to the
on page 32
The VIP6-80 supports any combination of LAN and WAN PAs, including Fast Ethernet, T1/E1,
High-Speed Serial Interface (HSSI), T3/E3, T3/E3 ATM, multichannel T1/E1, multichannel T3/E3,
OC-3 ATM, Packet over SONET (POS), and OC-12 ATM. For a list of supported port adapters, refer to
the
"Port Adapter Slots" section on page
Contents
This guide includes the following sections:
•
•
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
for more information.
Related Documentation, page 2
Product Description, page 3
Installation Prerequisites, page 10
"Single Line Card Reload" section
7.