Cisco VIP4-50= Instrukcja instalacji i konfiguracji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Sprzęt sieciowy Cisco VIP4-50=. Cisco VIP4-50= 44 stron. Fourth generation versatile interface processor
Drukuj stronę
VIP4 Overview
Specifications
The VIP4 physical specifications are listed in
Table 4
Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature
VIP4 Port Adapter Overview
The VIP4, a single motherboard, supports up to two single-width port adapters, or one dual-width port
adapter.
occupies both port adapter slots (not shown).
To ensure proper airflow in the router and compliance with EMI prevention standards, a VIP4 with one
Note
single-width port adapter must have a blank port adapter installed in the empty port adapter slot location.
Note
A VIP4 without at least one installed port adapter is not supported.
Figure 1
Packet
memory
DIMM U5
Fourth Generation Versatile Interface Processor (VIP4) Installation and Configuration Guide
6
VIP4 Specifications
Figure 1
shows a VIP4 with two installed single-width port adapters. A dual-width port adapter
VIP4 with Two Single-Width Port Adapters—Horizontal Orientation Shown
Bus connector
Port adapter
in slot 0
Table
4.
Specifications
The VIP4 occupies one chassis slot and can only be operated in a
Cisco 7500 series, or Cisco 7000 series routers using the 7000 Series
Route Switch Processor (RSP7000) and 7000 Series Chassis Interface
(RSP7000CI)
5 lb (2.25 kg)
32 to 104˚F (0 to 40˚C)
10 to 90 percent, noncondensing
-4 to 149˚F (-20 to 65˚C)
CPU
CPU memory
DIMM U1
Port adapter
in slot 1
OL-3673-01