Cisco WS-C6509 Instrukcja aktualizacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Sprzęt sieciowy Cisco WS-C6509. Cisco WS-C6509 24 stron. Catalyst 6500 series
Również dla Cisco WS-C6509: Podręcznik użytkownika (28 strony), Arkusz danych (30 strony)
Drukuj stronę
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
Warning
when servicing. Statement 1034
This product requires short-circuit (overcurrent) protection, to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Warning
When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046
Parts List
The following items are included in the upgrade kit:
•
•
•
Required Tools
These tools are required to perform the installation:
•
•
•
78-16162-02
One high speed fan tray
The high speed fan tray provides additional cooling for the Supervisor Engine 720 and the
Supervisor Engine 32.
The high speed fan tray requires external power, either from the 3000 W AC-input power supply or
from an external DC power source. The fan tray ships with power wires secured at each terminal
block. Use these wires to connect the fan tray to the 3000 W AC-input power supply using the
supplied cable, or remove them to connect to a DC power source.
One panel safety cover
The panel safety cover provides increased chassis airflow.
Two fan tray power cables (for AC-input systems)
The fan tray power cable provides a connection between the fan tray and the 3000 W AC-input
power supply. Two cables are provided for systems with redundant power supplies.
Number 1 Phillips-head screwdriver
Number 2 Phillips-head screwdriver
Flat-blade screwdriver (for DC-input systems)
Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note
Parts List
3