Cisco 2500 Series Podręcznik konfiguracji - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Serwer Cisco 2500 Series. Cisco 2500 Series 50 stron. Wireless controller
Również dla Cisco 2500 Series: Instrukcja instalacji (12 strony), Podręcznik konfiguracji (19 strony), Podręcznik wdrażania (23 strony), Podręcznik dla początkujących (47 strony)
Drukuj stronę
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
2
In the navigation pane, click Summary. The heading labeled Software Version shows the
current software version.
3
Download the appropriate software for your model of controller from the Cisco website.
4
Set up a Trivial File Transfer Protocol (TFTP) server running on a PC to download the
file to the controller.
5
From the main menu, click Commands.
6
In the navigation pane, click Download File.
7
Fill in the download parameters:
a
For File Type, select Code.
b For TFTP Server, type in the IP Address of the TFTP server.
Add the File Path (this is the path in the TFTP server's root directory and not the
c
system path where the TFTP server is located) and File Name of the firmware file to
download.
Note
The example simply uses the /designator for the root TFTP directory.
8
Point the TFTP server to the code.
9
Click Download and allow a few minutes for the download to complete.
10
Reboot the Controller.
Controller Setup
The initial setup of the controller is shown below.
Note: Example only
The setup instructions outlined in this document are for the configuration shown in the
diagram only. Your configuration may differ, and the appropriate adjustments must be
made.
721-1001-000-AH.docx
December 2016
12