Epson 4180 - Perfection Photo Podręcznik Start Here - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik Start Here dla Skaner Epson 4180 - Perfection Photo. Epson 4180 - Perfection Photo 9 stron. Scanning application force quits on mac os 10.4
Również dla Epson 4180 - Perfection Photo: Podręcznik (8 strony), Biuletyn wsparcia produktu (1 strony), Ważne instrukcje bezpieczeństwa (4 strony), Specyfikacje (2 strony), Biuletyn wsparcia produktu (23 strony), Podręcznik (11 strony), Aktualizacja (1 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (24 strony), Biuletyn wsparcia produktu (29 strony), Biuletyn wsparcia produktu (8 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (14 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (11 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (21 strony)

EPSON Scan

Color Restoration is available in Home and Professional Modes.

To select Color Restoration, start EPSON Scan. You see a screen similar to

this (in Home Mode):

Click the Preview button at the bottom of the screen to see your image.

Click Image Adjustments.

When the Image Adjustments screen appears, select Color Restoration.

Then click Close.

Click the Scan button on the screen to scan your image.

Scanning Film

The scanner cover has a built-in film adapter. To scan film

or negative strips, slides, or transparencies, you need

to remove the document mat from the scanner cover and

insert the film in a holder.

The scanner comes with 3 different film holders: one for

35 mm film or negative strips, one for 35 mm slides, and

one for medium-format (120/220) transparencies.

Make sure the film adapter cable is connected

to the scanner (see step 3 in "Connect the

Scanner"). If you need to connect

the cable, first turn the scanner

off. Then turn it back on again

after you connect the cable.

Lift the scanner cover all the way up

and slide the reflective document mat

up and off of the scanner cover.

Follow the instructions for the type of film you are scanning:

If you are scanning 35 mm film or negative strips or medium-format

(120/220) transparencies, slide the film into the corresponding holder,

with the film's shiny side facing down.

35 mm film or negative strips

Place the film holder on the scanner as shown. Make sure the small circle

on the tab fits into the hole on the scanner.

Make sure this

calibration space

is uncovered

Medium-format transparencies: Slide the film

into the holder as shown. Then lower the

cover and press the tab to lock it in place.

Cover tab