Cisco 6400 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco 6400. Cisco 6400 34 stron. Video surveillance 6400 ip camera
Również dla Cisco 6400: Arkusz danych (8 strony)
Drukuj stronę
IP Camera Physical Details
5
6
7
General Purpose I/O Terminal Block
Figure 1-3
Figure 1-3
1
The maximum output load from pins 7 and 8 is 400mA.
Note
Cisco Video Surveillance 6400 IP Camera Installation Guide
1-4
Reset button
Audio/Video out (green)
Microphone In (pink)
shows the GPIO terminal block pin locations and descriptions.
GPIO Terminal Block Pin Locations and Descriptions
2
3
4
5
6
7
8
Reboots the IP camera or resets it to a default state. Depending
on how long you depress the reset button, you can do either of
the following:
•
Reset—Press and release the reset button. Wait for the IP
Camera to reboot.
Restore—Press and hold the reset button for about
•
30 seconds. All settings will be restored to factory default.
Allows the connection of an optional Y cable or mini cable with
BNC connector. You can connect a video monitor to the mini
cable with BNC connector. Both cables are included in the
optional audio/video cables accessory kit can be purchased
from Cisco (Cisco part number CIVS-AVCABLE).
Support for audio will be in future releases.
Note
Connection for an external microphone.
Pin
Description
1
12 VDC-
2
12 VDC+
3
24 VAC
4
24 VAC
5
DI-
6
DI+
7
DO-
8
DO+
Chapter 1
Overview
OL-28494-01